Teknipure TS3PBI100R-99 TekniClean Pro Presat Polyester Knit 9″ x 9″ Wipers Refill 100% IPA, Case of 600
Teknipure TS3PBI100R-99 TekniClean® Pro Presat Polyester Knit Wiper Refill, Sealed Border, 100% IPA, 9 in x 9 in, Case of 600
The Teknipure TS3PBI100R-99 TekniClean® Pro Presat Refill is a presaturated 100% polyester knit cleanroom wiper with a sealed border in the standard 9"x9" format, pre-wetted with semiconductor-grade 100% isopropyl alcohol, packaged in flat resealable bags for use with TekniClean® dispenser systems or as a high-count alternative to the pail format. At 600 wipers per case, the refill format delivers triple the count of the pail format (TS3PBI100-99, 200/case) at a lower cost per wipe — making it the preferred choice for high-volume facilities using 100% IPA Pro Presat wipers in dispenser-based cleaning protocols. The Pro line’s sealed border provides a wider perimeter seal than a standard sealed edge for maximum fiber contamination control. IPA is 0.2μm filtered. Store at 59°F–86°F (15°C–30°C).
Sold in cases of 600 wipers (50 wipers/bag, 2 bags/pack, 6 packs/case).
Specifications
| SKU | TS3PBI100R-99 |
|---|---|
| Brand | Teknipure |
| Product Line | TekniClean® Pro Presat Refill |
| Construction | 100% polyester knit, TC3 Pro heavy construction, sealed border |
| Size | 9 in x 9 in (22.9 cm x 22.9 cm) |
| Saturation | 100% semiconductor-grade IPA (0.2μm filtered) |
| Packaging | 50 wipers/bag, 2 bags/pack, 6 packs/case, 600 wipers/case (resealable flat bags) |
| Cleanroom Rating | ISO Class 2–7 (Grades A–D, Class <1–10,000) |
| Shelf Life | 3 years from date of manufacture |
| Storage Conditions | 59°F–86°F (15°C–30°C), ambient conditions |
| Application | Moisture-sensitive component cleaning, optical surfaces, semiconductor wafer processing, flux residue removal, dispenser system refills requiring water-free IPA and maximum fiber control |
| Industries | Semiconductor/microelectronics, optical, medical device, aerospace/defense, precision electronics manufacturing |
Frequently Asked Questions
What is the difference between the TS3PBI100R-99 refill and the TS3PBI100-99 pail?
Both contain the same TekniClean® Pro 9"x9" polyester knit wiper with sealed border, presaturated with 100% semiconductor-grade IPA. The pail (TS3PBI100-99) has 200 wipers/case in recloseable pails — ideal for workstations with frequent access. The refill bag (TS3PBI100R-99) has 600 wipers/case in flat resealable bags — triple the count per case, lower cost per wipe, and designed for dispenser systems or facilities that open a fresh bag per cleaning session.
How does the Pro Presat 100% IPA refill (TS3PBI100R-99) differ from the standard Presat 100% IPA refill (TS2PUI100R-99)?
Both are 100% IPA presaturated 9"x9" refill bag format wipers at 600/case. The difference is wiper construction: the TS2PUI100R-99 uses TC2 standard construction with a sealed edge; the TS3PBI100R-99 uses TC3 Pro heavy construction with a sealed border — providing lower fiber release at the wiper margins. Choose the Pro refill when your protocol requires maximum fiber contamination control alongside water-free IPA delivery at high-volume dispensing economics.
When should I use 100% IPA instead of 70% IPA?
100% IPA is required when water content must be strictly controlled — for moisture-sensitive electronic components, optical coatings, semiconductor wafer processing, and processes where the 30% DI water in a 70/30 formulation would cause defects or interfere with subsequent steps. For general surface disinfection and bioburden reduction, 70% IPA is more effective because the water content is necessary for antimicrobial action.
Is the TS3PBI100R-99 suitable for flux residue removal?
Yes — 100% IPA is the preferred solvent for flux residue removal from PCBs and solder joints, dissolving rosin and water-soluble flux residues without leaving water spots. The Pro Presat refill format provides consistent IPA delivery per wipe and maximum fiber control from the sealed border — ideal for high-reliability electronics assembly in high-volume operations.
