JBC CP-1QF 120V Precision Rework Station with Micro Tweezers
JBC CP-1QF 120V Precision Rework Station with Micro Tweezers
The JBC CP-1QF is the 120V configuration of the CP Precision Rework Station for soldering and rework of SMT components, small to medium SOP packages and dual-line packages. It includes AM120-A Adjustable Micro Tweezers for working with compatible C120 cartridges. Cartridges are not included and must be selected separately for the component and task.
The compact station combines adjustable 90–450°C temperature control, a complete cleaning system and a cartridge exchanger. JBC Intelligent Heat Management includes Sleep and Hibernation modes to reduce idle thermal exposure. JBC specifies 90W nominal station power separately from the tool's 80W peak power.
Best Uses / Applications
- Precision soldering and rework of SMT chip components.
- Work on small to medium SOP and dual-line packages with suitable cartridge geometry.
- Electronics repair, engineering development and prototype benches.
- Production rework requiring adjustable micro tweezers and controlled contact heating.
- ESD-controlled electronics workstations with appropriate grounding and process controls.
Key Features
- 120V CP-1QF configuration with AM120-A Adjustable Micro Tweezers.
- C120 cartridge compatibility; cartridges sold separately.
- Selectable 90–450°C / 190–840°F temperature range.
- 90W nominal station power and 80W peak tool power.
- Sleep and Hibernation modes to help reduce idle tip oxidation and thermal exposure.
- Cleaning system and cartridge exchanger for routine tip maintenance and changes.
- USB-B PC communications and supported data download, software update and traceability functions.
- FAE / Robot connector for remote control or compatible FAE fume extractor connection.
Technical Specifications
| Specification | Value |
|---|---|
| Manufacturer / model | JBC / CP-1QF |
| Product family | CP Precision Rework Station |
| Input voltage configuration | 120V |
| Nominal station power | 90W |
| Peak tool power | 80W |
| Selectable temperature | 90–450°C / 190–840°F |
| Idle temperature stability, still air | ±1.5°C / ±3°F |
| Temperature accuracy | ±3%, using reference cartridge |
| Temperature adjustment | ±50°C / ±90°F through station menu |
| Tip-to-ground resistance | Less than 2 ohms |
| Tip-to-ground voltage | Less than 2mV RMS |
| ESD designation | Manufacturer lists ESD safe, meeting ANSI/ESD S20.20 |
| Included tool | AM120-A Adjustable Micro Tweezers |
| Cartridges | C120 range; not included |
| USB-B | PC communications |
| FAE / Robot connector | Remote control or FAE fume extractor connection |
| Earthing fuse | F 1.25A |
| Control unit dimensions | 170 × 176 × 145mm / 6.69 × 6.93 × 5.71in |
| Control unit weight | 2.70kg / 5.96lb |
| Manufacturer package dimensions | 234 × 234 × 258mm / 9.21 × 9.21 × 10.16in |
| Manufacturer package weight | 3.14kg / 6.92lb; not a shipping quotation |
Package Contents
- CP Control Unit, 120V configuration.
- AM120-A Adjustable Micro Tweezers.
- Instruction manual.
C120 cartridges are not included. Select compatible cartridges for the component geometry and application. Fume extraction equipment and other accessories are separate unless specified in your quotation.
Choosing a Precision Rework Station
| Consideration | CP-1QF Micro Tweezers Station | General-Purpose Single-Iron Station |
|---|---|---|
| Tool approach | Adjustable micro tweezers with compatible C120 cartridges | Single soldering handle with its specified cartridge family |
| Primary selection factor | Contact geometry for SMT and package rework | Tip geometry and thermal performance for individual joints |
| Accessories to verify | Correct C120 cartridges for the task | Correct handle and cartridge combination |
| Voltage selection | CP-1QF is 120V | Check the exact model's supply rating |
Within the CP family, JBC lists CP-9QF for 100V, CP-1QF for 120V and CP-2QF for 230V. Match the exact model to your installation supply. Micro tweezers are not a substitute for every soldering, vacuum-desoldering or hot-air process.
Setup and Cartridge Care
- Verify the 120V configuration against the equipment label and installation supply.
- Choose compatible C120 cartridge geometry and align the tweezers according to JBC instructions.
- Use the lowest practical temperature that completes the operation reliably.
- Keep working surfaces clean and tinned, and avoid excessive pressure or abrasive damage.
- Return the tool to its holder between tasks so supported heat-management functions can reduce idle exposure.
- Follow the manufacturer instructions for cartridge exchange, grounding, fume control and shutdown.
Frequently Asked Questions
Is this the same model as the CDP micro tweezers listing?
This listing is for SKU CP-1QF. JBC's current product page identifies that exact reference as the 120V CP Precision Rework Station, supplied with AM120-A Adjustable Micro Tweezers.
Are C120 cartridges included?
No. JBC explicitly states that cartridges are not included. Order compatible C120 cartridges suited to your component and operation.
Which tool is included?
The manufacturer's package composition lists AM120-A Adjustable Micro Tweezers and the CP Control Unit.
What components is it intended for?
JBC describes soldering and rework of SMT components, small to medium SOP packages and dual-line packages. Suitability depends on component geometry, cartridge selection and process requirements.
Is its power rating 80W or 90W?
Both describe different ratings: 90W is nominal station power, while 80W is peak tool power.
What temperature range does it offer?
The selectable range is 90–450°C / 190–840°F, with menu temperature adjustment of ±50°C / ±90°F.
Does it connect to a fume extractor?
It has an FAE / Robot connector for remote control or compatible JBC FAE extraction equipment. The listed package does not include an extractor.
How do Sleep and Hibernation modes help?
They reduce idle thermal exposure. JBC describes tip-life extension of up to five times with its heat-management system; actual cartridge life depends on use, settings and care.
