Indium CW-807 Wire Solder 52922-0113 | SAC305 Lead-Free No-Clean ROL0 | .015" Dia | 1/4lb Spool | MOQ: 40

Indium CW-807 Wire Solder 52922-0113 | SAC305 Lead-Free No-Clean ROL0 | .015" Dia | 1/4lb Spool | MOQ: 40

Indium CW-807 (part number 52922-0113) is Indium Corporation’s best-selling flux-cored wire solder in a SAC305 (Sn96.5/Ag3/Cu0.5) lead-free formulation, in a fine .015" diameter, 1/4lb spool with a minimum order quantity of 40 spools. The .015" diameter is suited for precision fine-pitch SMD hand soldering and rework requiring tight solder volume control — finer than the standard .020" for more controlled deposition on small pads. CW-807 meets J-STD-004B ROL0, is halogen-free (<500ppm), and passes SIR and ECM testing. RoHS compliant.

Note: This listing has a minimum order quantity (MOQ) of 40 spools. Contact MTE Solutions at 651-600-3838 for smaller quantities or alternative configurations.

Key Specifications

Key Features

• Fine .015" diameter — precision SMD control — finer than standard .020" for tighter solder volume control on small SMD pads and fine-pitch leads; between .010" (ultra-fine) and .020" (general purpose) in the CW-807 range
• SAC305 lead-free — RoHS compliant — industry-standard lead-free alloy compatible with all SAC305-based SMT processes
• Halogen-free no-clean — ROL0 — <500ppm total halogen; no post-solder cleaning required
• SIR & ECM tested — residue is electronically safe for virtually all applications
• MOQ 40 x 1/4lb spools — production volume — designed for high-volume production consumption of fine-diameter wire

Frequently Asked Questions

When should I choose .015" over .010" or .020" for SAC305 hand soldering?
The .015" is the middle ground between ultra-fine .010" (for micro-pads and 0201 components) and general-purpose .020" (for 0603+ SMD and through-hole). Choose .015" when .020" deposits slightly too much solder on your pads but .010" requires too much wire feed to be efficient. Common applications include 0402 SMD components, fine-pitch QFP leads, and small connector pins where solder volume control is important but not at the micro-scale level.

What is the total weight of the MOQ 40 order?
40 spools x 1/4lb each = 10 lbs total. This is a production-scale order designed for high-consumption environments using .015" fine wire.

Is the no-clean residue safe to leave on the board?
Yes — CW-807 passes J-STD-004B SIR and ECM tests regardless of wire diameter. The flux chemistry and residue behavior are consistent across all CW-807 diameters.

Can I order fewer than 40 spools?
This listing is for the MOQ 40 configuration. Contact MTE Solutions at 651-600-3838 for smaller quantity options or alternative .015" SAC305 configurations.

Is 52922-0113 RoHS compliant?
Yes — SAC305 is a lead-free alloy and is RoHS compliant. CW-807 SAC305 wire is suitable for all RoHS-regulated product manufacturing.