Berkshire SPXPNWZ00116 SatPax PNW Vigon SC 200 Stencil Cleaner Wipes, Canister, 2,000 Sheets/Case
Berkshire SPXPNWZ00116 — SatPax® PNW Vigon® SC 200 Pre-Wetted Stencil Cleaner Wipes, Canister, 2,000 Sheets/Case
- Substrate: 100% polyester hydroentangled nonwoven (no cellulose, 100% synthetic)
- Solution: Zestron Vigon® SC 200 — pH neutral, water-based stencil cleaner
- Sheet Size: 6" x 8" (15 cm x 20 cm)
- Pack Configuration: 125 sheets/canister, 16 canisters/case, 2,000 sheets total
- Non-shedding, low-linting nonwoven construction
- Fast-drying, odor-free formula
- Compatible with nano-coated stencils
- RoHS I, II & III / WEEE / REACH SVHC compliant
- No visible staining to stencil
Why SatPax PNW Vigon SC 200?
The Berkshire SPXPNWZ00116 combines two industry-leading technologies: Berkshire's SatPax® Polx Nonwoven wiper substrate and Zestron's Vigon® SC 200 stencil cleaning chemistry. The result is a pre-wetted wipe engineered specifically for the demands of SMT and electronics assembly manufacturing — delivering consistent, controlled chemistry application without the variability of manual solvent dispensing.
Unlike alcohol-based cleaners that may leave residues, produce VOC emissions, or fail to fully remove modern no-clean and water-soluble solder pastes, Vigon SC 200 is a pH-neutral, water-based formula that quickly and effectively dissolves solder pastes and adhesives from SMT stencils, misprinted PCBs, and assembly tooling. The 100% synthetic polyester nonwoven substrate is smooth, durable, and non-shedding — safe for nano-coated stencils and precision surfaces where fiber contamination is unacceptable.
Applications
The SPXPNWZ00116 is designed for electronics assembly environments requiring fast, effective, and compliant stencil cleaning. Typical applications include:
- Manual SMT stencil cleaning between print cycles
- Misprint removal from PCBs prior to reflow
- Cleaning of squeegees, frames, and assembly tooling
- Replacement for alcohol-based cleaners where VOC restrictions apply
- Facilities requiring RoHS, REACH, and WEEE compliance documentation
- Nano-coated stencil cleaning where abrasive or solvent-heavy wipes are prohibited
Product Specifications
| Specification | Value |
|---|---|
| SKU | SPXPNWZ00116 |
| Substrate | 100% Polyester Hydroentangled Nonwoven |
| Cleaning Solution | Zestron Vigon® SC 200 |
| Solution Type | pH Neutral, Water-Based |
| Sheet Size | 6" x 8" (15 cm x 20 cm) |
| Sheets per Canister | 125 |
| Canisters per Case | 16 |
| Total Sheets per Case | 2,000 |
| Format | Pre-wetted canister (resealable) |
| Drying | Fast-drying, odor-free |
| Compliance | RoHS I/II/III, WEEE, REACH SVHC |
| Stencil Compatibility | Including nano-coated stencils |
| Case Weight | 23 lbs |
Frequently Asked Questions
What is Zestron Vigon SC 200?
Vigon® SC 200 is a pH-neutral, water-based stencil cleaning chemistry developed by Zestron. It is formulated to remove all types of solder pastes and adhesives used in SMT electronics assembly, including no-clean, water-soluble, and lead-free formulations, without damaging stencil coatings or leaving visible residue.
Is this wipe safe for nano-coated stencils?
Yes. The SPXPNWZ00116 is specifically validated as compatible with nano-coated stencils. The soft polyester nonwoven substrate and pH-neutral chemistry will not degrade or abrade nano-coatings.
Why use this instead of IPA-based wipes for stencil cleaning?
IPA-based cleaners may not fully dissolve modern no-clean solder pastes and can be restricted in facilities with VOC emission limits or hazardous waste disposal requirements. Vigon SC 200 is water-based, odor-free, and fast-drying — providing superior cleaning performance while meeting environmental and safety compliance requirements.
What compliance certifications does this product meet?
The SPXPNWZ00116 is compliant with RoHS I, II, and III, WEEE, and REACH SVHC regulations — making it suitable for use in facilities supplying to European and global electronics markets with strict environmental documentation requirements.
How many wipes are in a case?
Each case contains 16 canisters of 125 sheets each, for a total of 2,000 sheets per case.
Can these wipes be used on misprinted PCBs?
Yes. In addition to stencil cleaning, the SPXPNWZ00116 is effective for removing solder paste from misprinted PCBs prior to reflow, as well as cleaning squeegees and assembly tooling.
