ACL Staticide 4400 ESD Polycoat Paint, Gray, 1 & 5 Gallon
ACL Staticide 4400 ESD Polycoat Paint, Gray, 1 & 5 Gallon
Protect ESD-controlled work areas with ACL Staticide 4400 ESD Polycoat, a water-based polyurethane coating for concrete floors and compatible work surfaces. Choose from the listed gray color and package options. The product information identifies this coating for conductive-to-static-dissipative ESD applications and cites ANSI/ESD S20.20 and IEC 61340-5-1.
Product specifications
| Specification | Details |
|---|---|
| Manufacturer | ACL Staticide |
| Product line | 4400 ESD Polycoat |
| Coating base | Water-based polyurethane |
| Finish colors listed | Light Gray, Medium Gray, Dark Gray |
| Package options listed | 1-gallon and 5-gallon pail, availability depends on selected variant |
| Listed electrical range | 10⁶–10⁹ ohms/square |
| Use context | ESD-protected areas and static-controlled work surfaces |
| Standards cited in current product information | ANSI/ESD S20.20; IEC 61340-5-1 |
Best uses
- Coating concrete floors in electronics assembly and other static-controlled work areas.
- Adding an ESD coating to compatible workbenches and other listed surfaces.
- Refinishing an existing surface when the substrate and preparation are suitable for this coating.
Confirm substrate compatibility and project requirements with the manufacturer’s current technical data before application. ESD performance depends on correct installation, grounding, and verification in the finished area.
Listed size and color variants
| Size | Color | SKU |
|---|---|---|
| 1 gallon | Medium Gray | 4400MG1 |
| 1 gallon | Dark Gray | 4400DG1 |
| 5-gallon pail | Light Gray | 4400LG5 |
| 5-gallon pail | Medium Gray | 4400MG5 |
| 5-gallon pail | Dark Gray | 4400DG5 |
Application notes
- Prepare a clean, dry surface free of oil, wax, and contaminants before coating.
- The current product information recommends two coats and 24 hours between coats.
- Allow the listed full-cure period of 7 days before heavy foot traffic or equipment placement.
- Follow the manufacturer’s current technical data sheet for surface preparation, application conditions, grounding, testing, and coverage for your project.
How 4400 compares with 6700 ESD Paint Plus
| Product | Coating base in current product information | Consider it for |
|---|---|---|
| ACL Staticide 4400 ESD Polycoat | Water-based polyurethane | ESD-coated floors and compatible work surfaces where the 4400 specifications fit the project. |
| ACL Staticide 6700 ESD Paint Plus | Water-based acrylic | Projects where its listed dissipative or conductive formulation and surface requirements are the better match. |
Check the current manufacturer data for the selected coating and confirm that its resistance range, substrate compatibility, and installation method match your ESD program.
Frequently asked questions
What is ACL Staticide 4400 ESD Polycoat?
It is a water-based polyurethane coating in ACL Staticide’s 4400 line, listed for ESD-controlled floors and compatible work surfaces.
Which sizes and colors can I select?
The catalog currently lists 1-gallon Medium Gray and Dark Gray options, plus 5-gallon pails in Light, Medium, and Dark Gray. Select an available variant on this page.
What is the listed electrical range?
The current product information lists 10⁶–10⁹ ohms per square. Confirm the required measurement method and test the installed floor or surface as part of your ESD control program.
How should I prepare the surface?
The product information calls for a clean, dry surface free of oil, wax, and contaminants. Follow the manufacturer’s current technical data sheet for the substrate and application conditions.
How many coats and how much cure time are listed?
The current listing recommends two coats, 24 hours between coats, and 7 days before heavy foot traffic or equipment placement. Verify the current manufacturer instructions before starting a project.
Can I use 4400 on a workbench or wall?
The current product information lists floors, workbenches, walls, and other compatible surfaces. Confirm the substrate is suitable and follow ACL Staticide’s application instructions.
