ACL Staticide 4040 Degreaser & Paint Prep Concentrate
ACL Staticide 4040 Degreaser & Paint Prep Concentrate
Prepare floor surfaces before painting, coating, or applying an ESD floor finish with ACL Staticide 4040 Degreaser & Paint Prep Concentrate. The listed 5:1 water-to-concentrate dilution helps you use this cleaner for floor preparation and heavy-duty degreasing before a coating project.
Product specifications
| Specification | Details |
|---|---|
| Manufacturer | ACL Staticide |
| Product | 4040 Degreaser & Paint Prep Concentrate |
| Product type | Floor degreaser and paint-preparation concentrate |
| Listed dilution | 5 parts water to 1 part concentrate |
| Listed application tools | Auto scrubber with stripping pad or stiff-bristle broom/brush |
| Variant options | Gallon Units - Case of 4; 5 Gallon Pail |
| Variant SKUs | 4040-1; 4040-5 |
Best uses
- Degreasing concrete and hard floors before applying a floor coating.
- Preparing a floor before an ESD floor finish or paint project.
- Removing dirt, grease, and surface contaminants as part of a planned floor-maintenance routine.
Preparation guidance
- Dilute using the listed 5:1 water-to-concentrate ratio.
- Apply with an auto scrubber and stripping pad or a stiff-bristle broom/brush, as described in the current product information.
- Follow the manufacturer’s label and current technical guidance for surface compatibility, contact time, rinsing, protective equipment, and disposal.
- Allow the prepared surface to meet the coating manufacturer’s requirements before applying paint or ESD finish.
Frequently asked questions
What is ACL Staticide 4040 used for?
It is a concentrated degreaser and paint-preparation cleaner for removing dirt and grease from floors before painting, coating, or applying an ESD floor finish.
What is the listed dilution ratio?
The current product information specifies 5 parts water to 1 part concentrate. Follow the product label and manufacturer guidance for your application.
How can I apply the cleaner?
The product information lists an auto scrubber with a stripping pad or a stiff-bristle broom/brush.
Which package options are listed?
The available options are Gallon Units - Case of 4 and a 5 Gallon Pail. Select the option shown in the product selector.
Can I apply ESD paint immediately after cleaning?
Check the cleaner label and coating manufacturer’s instructions for required rinsing, drying, and surface condition before coating. The timing depends on the project and substrate.
Is 4040 an ESD floor coating?
No. It is a floor degreaser and paint-preparation concentrate used before a floor coating or ESD floor finish.
