ACL Staticide 4800-5, Ultra II Dissipative Floor Finish, 5 Gallon

ACL Staticide 4800-5 — Ultra II ESD Dissipative Floor Finish | 5-Gallon | ANSI/ESD S20.20

ACL Staticide 4800 Ultra II Floor Finish is the advanced urethane-enhanced ESD floor finish engineered for demanding environments where standard floor finishes fail. Its unique acrylic polymer formula provides superior adhesion and static control on out-of-warranty ESD floors, epoxy, concrete, and dissipative tile — including surfaces with problematic plasticizers that cause other finishes to delaminate or lose conductivity. It does not yellow, flake, or scuff easily, and maintains gloss and ESD performance for 12–18 months per strip cycle.

Staticide 4800 Ultra II meets ANSI/ESD S20.20 requirements, is UL-listed for slip resistance, and is free of formaldehyde, phthalates, alkalis, and acids. Ideal for any EPA or static-sensitive manufacturing environment with installed ESD flooring.

SKU: 4800-5 | Size: 5-Gallon Pail | ANSI/ESD S20.20 Compliant.

⚠️ Winter Shipping Notice: Due to freeze-cycle limitations, ACL ships floor finishes only on Mondays and Tuesdays during winter months. Shipping halts may occur during extreme weather.

Technical Data Sheet (TDS)  |  Safety Data Sheet (SDS)  |  Application Manual

Specifications

Key Features

• Urethane-enhanced formula — superior abrasion resistance and durability vs. standard acrylic ESD finishes; doesn't yellow, flake, or scuff easily
• Works on difficult surfaces — compatible with problematic plasticizers in conductive/dissipative tile and epoxy; also suitable for concrete
• ANSI/ESD S20.20 compliant — 10⁷–10⁹ ohm resistivity for certified EPA environments
• 12–18 month strip cycle — reduces recoating frequency and maintenance cost
• UL listed for slip resistance — meets industrial and commercial safety standards
• Formaldehyde & phthalate free — safer for cleanroom, medical, and sensitive manufacturing environments
• Low VOC (<4%) — suitable for occupied facilities and cleanroom use

Industries & Applications

• Electronics manufacturing — EPA and static-sensitive assembly floors
• Medical device manufacturing — cleanroom and controlled environment floors
• Cleanroom facilities — ISO-classified environments with ESD flooring
• Out-of-warranty ESD tile — restoring static dissipative properties on aged floors
• Epoxy and concrete floors — adding ESD protection without flooring replacement

Frequently Asked Questions

What makes the 4800 Ultra II different from the 4600 Ultra?

The 4800 Ultra II uses a urethane-enhanced formula with advanced acrylic polymers, making it suitable for more difficult surfaces including concrete, epoxy, ESD epoxy, and dissipative tile with problematic plasticizers. The 4600 Ultra is designed for vinyl, linoleum, and ceramic tile. The 4800 also has a slightly shorter strip cycle (12–18 months vs. 12–24 months) but offers better adhesion on specialty substrates.

Can 4800 Ultra II be used on concrete floors?

Yes — Staticide 4800 Ultra II is specifically formulated to work on concrete in addition to epoxy, ESD epoxy, and dissipative tile. This makes it a versatile choice for facilities with mixed flooring types.

What is the coverage rate for 4800-5?

Coverage is approximately 750–1,000 sq. ft. per gallon at 2 coats. A 5-gallon pail covers approximately 3,750–5,000 sq. ft. at the recommended application rate.

Is Staticide 4800 free of hazardous chemicals?

Yes — Staticide 4800 Ultra II is free of formaldehyde, phthalates, alkalis, and acids, making it suitable for use in cleanrooms, medical facilities, and other environments with strict chemical restrictions.