Hakko FX972-010 120V Dual-Port Soldering Station
Hakko FX972-010 120V Dual-Port Soldering Station
The Hakko FX-972 (part number FX972-010) is a 200W, 120V dual-port soldering station supplied with an FX-9701 standard soldering iron and FH-215 holder. Its two-port design supports a flexible bench setup with a choice of eight compatible handpiece options. That means eight available tool choices, not eight handpieces connected simultaneously. Tips are sold separately.
For a production or repair bench handling different joint sizes, a dual-port station helps organize compatible tools around one control unit. Select handpieces and tip geometry for the work rather than assuming every tool uses the same tip family or temperature range.
Best Uses / Applications
- Electronics assembly and PCB repair benches using different compatible tool configurations.
- Through-hole and accessible surface-mount soldering with a suitable handpiece and tip.
- High-mix production and prototyping where tool selection varies by joint.
- ESD-sensitive electronics work within a properly grounded workstation.
- Connected soldering-process management using compatible Hakko Control Software.
Key Features
- Dual handpiece ports with eight available compatible handpiece options.
- 200W station power consumption and 120V supply configuration.
- Overall listed temperature range of 50–500°C, depending on the selected handpiece.
- FX-9701 standard iron and FH-215 holder included.
- T39-series tips for the FX-9701 handpiece, sold separately.
- Hakko Control Software V4 or higher compatibility.
- FG-100/101B wireless IR offsetting support; confirm required equipment and setup before use.
Technical Specifications
| Model | FX-972 |
|---|---|
| Ordering part number | FX972-010 |
| Supply voltage | 120V |
| Station power consumption | 200W |
| Handpiece ports | 2 |
| Compatible handpiece options | 8 available options; not 8 simultaneous connections |
| Temperature range | 50–500°C / 120–940°F; varies with handpiece |
| Idle temperature stability | ±3°C / ±5°F |
| Output voltage | 24V |
| Station dimensions, W × H × D | 126 × 151 × 136 mm / approximately 5.0 × 5.9 × 5.4 in |
| Station weight | 2.8 kg / 6.2 lb |
| Included handpiece | FX-9701 |
| Tip family for included handpiece | T39 series |
| Tip-to-ground resistance | Less than 2 Ω |
| Tip-to-ground potential | Less than 2 mV |
| Handpiece cord length | 1.2 m / 3.9 ft |
| Handpiece length, excluding cord | 188 mm / 7.4 in |
| Handpiece weight, excluding cord | 31 g / 1.1 oz with T39-D24 tip |
| Software compatibility | Hakko Control Software V4 or higher |
What Is Included?
| Item | Description / reference |
|---|---|
| Station | FX972-011 control unit, supplied as part of the FX972-010 package |
| Soldering iron | FX-9701 standard handpiece |
| Iron holder | FH-215 |
| Color bands | 2 pieces, B5348 |
| Power cord | B2419 |
| USB cable | B5129 |
| CD-ROM | Listed in Hakko's package contents |
| Instruction manual | Included |
Tips are not included. Order compatible T39 tips for the included FX-9701 iron separately. Additional handpieces and their matching tips must be selected for the intended configuration.
FX-972 vs. FX-971 Selection Guide
| Consideration | FX972-010 | FX971-010 |
|---|---|---|
| Port arrangement | Dual-port | Single-port |
| Station power consumption | 200W | 100W |
| Included standard handpiece | FX-9701 | FX-9701 |
| Tip family for standard handpiece | T39; sold separately | T39; sold separately |
| Software version | Hakko Control Software V4 or higher | Hakko Control Software V3 or higher |
| Selection focus | Two-port flexibility and broader handpiece choice | Single-tool bench setup |
Soldering Tip Care Guide
Keep the working surface clean and tinned, select the lowest effective temperature for the joint and follow Hakko's maintenance instructions for the installed handpiece and tip.
- Cracking: Avoid impact and excessive pressure. Never strike the handpiece to remove solder; replace tips with damaged plating.
- Corrosion: Avoid unnecessary high-temperature operation and prolonged idle heating. Apply fresh solder after cleaning and before shutdown.
- Dewetting: If solder stops wetting the working surface, use an appropriate cleaner and fresh solder according to Hakko's procedure. Do not file or sand the plated working surface.
- Wear: Choose a tip geometry with suitable contact area rather than compensating with force. Replace deformed, pitted or worn tips.
Daily care summary: Inspect, select an appropriate working temperature, clean gently, re-tin and follow the station's shutdown procedure.
Frequently Asked Questions
Can the FX-972 connect eight handpieces at once?
No. It is a dual-port station. Hakko's eight-handpiece statement refers to available compatible handpiece options, not eight simultaneous connections.
Does FX972-010 include a soldering iron and holder?
Yes. Hakko lists the FX-9701 standard handpiece and FH-215 holder in this package.
Why does the package list FX972-011?
FX972-011 identifies the station control unit included within the FX972-010 package. This listing is the FX972-010 package with its listed accessories.
Are soldering tips included?
No. Select T39-series tips separately for the included FX-9701 handpiece. Other handpieces require their own compatible tip selection.
Can every handpiece operate at 500°C?
Do not assume that. Hakko lists an overall 50–500°C / 120–940°F range and explicitly states that the temperature range varies with the handpiece.
Which Hakko Control Software version is compatible?
Hakko specifies V4 or higher for the FX-972. Verify current computer and connection requirements before deploying software connectivity.
Is the FX-972 ESD safe?
The station is listed as ESD safe. The included iron has tip-to-ground resistance below 2 Ω and potential below 2 mV. Use proper grounding and the facility's ESD-control procedures.
Should I choose FX-971 or FX-972?
Choose based on tool requirements: FX-971 provides a single-port setup, while FX-972 offers two ports and a broader choice of compatible handpieces. Confirm the tools and tip families needed for the work.
