Dymax T20010 Micro-Dot Hand-Held Manual Syringe Dispenser
Dymax T20010 Micro-Dot Hand-Held Manual Syringe Dispenser
The Dymax T20010 Micro-Dot™ is a hand-held, thumb-actuated manual syringe dispenser for controlled micro-dot dispensing of UV-cure adhesives, cyanoacrylates, epoxies, silicones and other low-to-medium viscosity fluids. No air or power is required. Its adjustable plunger stroke provides a stated dot range of 0.5–3 mm and it accepts standard Luer-lock syringes in 3cc, 5cc, 10cc and 30cc sizes.
Sold individually. Syringes and dispensing tips sold separately.
Best uses
- R&D, prototyping and small-batch adhesive dispensing where a powered dispenser is unnecessary.
- Electronics and optical assembly jobs calling for manually placed small adhesive deposits.
- Field repair and bench rework without compressed air or an electrical supply.
- Low-volume industrial bonding with compatible fluids and syringes.
Specifications
| Model | T20010 |
|---|---|
| Type | Hand-held manual syringe dispenser |
| Actuation | Thumb-actuated adjustable plunger |
| Stated dot size range | 0.5–3 mm |
| Compatible syringes | 3cc, 5cc, 10cc and 30cc standard Luer-lock |
| Stated viscosity range | Up to 50,000 cps |
| Air / power | None required |
| Fluids listed | UV-cure adhesives, cyanoacrylates, epoxies, silicones, solvents and lubricants; confirm compatibility with the fluid and syringe |
Key features
- Portable manual dispensing for flexible workstations.
- Adjustable stroke to help control deposit size.
- Works with listed standard Luer-lock syringe sizes; tips and syringes are separate.
Dymax dispenser comparison
| Model | Operation | Best fit |
|---|---|---|
| T20010 (this listing) | Manual, no air or power | R&D, field work, rework and low-volume dispensing |
| SD-200 (60600) | Powered digital syringe dispenser | Higher-volume dispensing where a powered setup is preferred |
Frequently asked questions
Does the T20010 require compressed air or power?
No, it is manually actuated.
Which syringe sizes fit?
The existing product specifications list 3cc, 5cc, 10cc and 30cc standard Luer-lock syringes. Syringes and tips are sold separately.
How is dot size adjusted?
Adjust the plunger stroke and test with your fluid, syringe and tip before a production run. The listing states a 0.5–3 mm dot range.
Can it dispense UV-cure adhesive?
UV-cure adhesives are among the listed fluids; use appropriate compatible syringes and tips and protect light-sensitive material from premature cure.
When is a powered dispenser a better choice?
Consider one for higher-volume work or when your process requires more tightly controlled timed deposits.
Learn more: Dymax products · Adhesive dispensing equipment
