Teknipure TS3PBI100-99 TekniCLean Pro Polyester Knit Presaturated Wiper, 100% IPA, 9"x9", Case of 200
Teknipure TS3PBI100-99 TekniClean® Pro Presat Polyester Knit Wiper, Sealed Border, 100% IPA, 9 in x 9 in, Case of 200
The Teknipure TS3PBI100-99 TekniClean® Pro Presat is a presaturated 100% polyester knit cleanroom wiper with a sealed border in the standard 9"x9" format, pre-wetted with semiconductor-grade 100% isopropyl alcohol, packaged in recloseable pails, rated for ISO Class 2–7 environments. This product combines the TC3 Pro line’s heavy-weight construction and wide sealed border with 100% IPA saturation — the premium choice for moisture-sensitive applications in high-classification environments where both maximum fiber contamination control and water-free IPA delivery are simultaneously required. Used in semiconductor wafer processing, optical coating cleaning, flux residue removal, and any process where the 30% DI water in a 70/30 formulation would cause defects. IPA is 0.2μm filtered. Store at 59°F–86°F (15°C–30°C).
Sold in cases of 200 wipers (100 wipers/pail, 2 pails/case).
Specifications
| SKU | TS3PBI100-99 |
|---|---|
| Brand | Teknipure |
| Product Line | TekniClean® Pro Presat |
| Construction | 100% polyester knit, TC3 Pro heavy construction, sealed border |
| Size | 9 in x 9 in (22.9 cm x 22.9 cm) |
| Saturation | 100% semiconductor-grade IPA (0.2μm filtered) |
| Packaging | 100 wipers/pail, 2 pails/case, 200 wipers/case (recloseable pail) |
| Cleanroom Rating | ISO Class 2–7 (Grades A–D, Class <1–10,000) |
| Shelf Life | 3 years from date of manufacture |
| Storage Conditions | 59°F–86°F (15°C–30°C), ambient conditions |
| Application | Moisture-sensitive component cleaning, optical coating surfaces, semiconductor wafer processing, flux residue removal, high-classification processes requiring water-free IPA and maximum fiber control |
| Industries | Semiconductor/microelectronics, optical, medical device, aerospace/defense, precision electronics manufacturing |
Frequently Asked Questions
When should I use the Pro Presat 100% IPA (TS3PBI100-99) instead of the Pro Presat 70% IPA (TS3PBI70-99)?
Use 100% IPA when water content must be strictly controlled — for moisture-sensitive electronic components, optical coatings, semiconductor wafer processing, and processes where the 30% DI water in a 70/30 formulation would cause defects or interfere with subsequent steps. Use 70% IPA (TS3PBI70-99) for general surface disinfection and bioburden reduction, where the water content is necessary for antimicrobial efficacy. Both use the same TC3 Pro sealed border construction; the choice is driven entirely by your IPA concentration requirement.
What is the difference between the Pro Presat 100% IPA (TS3PBI100-99) and the standard Presat 100% IPA (TS2PUI100-99)?
Both are presaturated 9"x9" wipers with 100% semiconductor-grade IPA in pail format at 200/case. The difference is wiper construction: the TS2PUI100-99 uses TC2 standard construction with a sealed edge; the TS3PBI100-99 uses TC3 Pro heavy construction with a sealed border — providing lower fiber release at the wiper margins. Choose the Pro when your protocol requires maximum fiber contamination control alongside water-free IPA delivery.
Is a refill format available for the Pro Presat 100% IPA wiper?
Yes — the TS3PBI100R-99 is the refill bag format for the 9"x9" Pro Presat 100% IPA wiper, with higher count per case for dispenser systems and high-volume facilities.
Is the TS3PBI100-99 suitable for flux residue removal after soldering?
Yes — 100% IPA is commonly used for flux residue removal from PCBs and solder joints because it dissolves rosin and water-soluble flux residues effectively without leaving water spots. The Pro Presat format adds the benefit of consistent IPA delivery per wipe and maximum fiber control from the sealed border construction — ideal for high-reliability electronics assembly where both cleanliness and contamination control are critical.
