Teknipure TS2PUI100R-99 TekniClean Presat Polyester Knit Wipe Refill, 100% IPA, 9"x9", Case of 600
Teknipure TS2PUI100R-99 TekniClean® Presat Polyester Knit Wiper Refill, 100% IPA, 9 in x 9 in, Case of 600
The Teknipure TS2PUI100R-99 TekniClean® Presat Refill is a presaturated 100% polyester knit cleanroom wiper with a sealed edge in the standard 9"x9" format, pre-wetted with semiconductor-grade 100% isopropyl alcohol, packaged in flat resealable bags for use with TekniClean® dispenser systems or as a high-count alternative to the pail format. At 600 wipers per case, the refill format delivers double the count of the pail format (TS2PUI100-99, 300/case) at a lower cost per wipe, making it the preferred choice for high-volume facilities using 100% IPA in dispenser-based cleaning protocols. IPA is 0.2μm filtered. Store at 59°F–86°F (15°C–30°C).
Sold in cases of 600 wipers (50 wipers/bag, 12 bags/case).
Specifications
| SKU | TS2PUI100R-99 |
|---|---|
| Brand | Teknipure |
| Product Line | TekniClean® Presat Refill |
| Construction | 100% polyester knit, continuous-filament, sealed edge |
| Size | 9 in x 9 in (22.9 cm x 22.9 cm) |
| Saturation | 100% semiconductor-grade IPA (0.2μm filtered) |
| Packaging | 50 wipers/bag, 12 bags/case, 600 wipers/case (resealable flat bags) |
| Cleanroom Rating | ISO Class 2–7 (Grades A–D, Class <1–10,000) |
| Shelf Life | 3 years from date of manufacture |
| Storage Conditions | 59°F–86°F (15°C–30°C), ambient conditions |
| Application | Moisture-sensitive component cleaning, optical surfaces, semiconductor wafer processing, flux residue removal, dispenser system refills |
| Industries | Semiconductor/microelectronics, optical, medical device, aerospace/defense, precision electronics manufacturing |
Frequently Asked Questions
What is the difference between the TS2PUI100R-99 refill and the TS2PUI100-99 pail?
Both contain the same TekniClean® 9"x9" polyester knit wiper presaturated with 100% semiconductor-grade IPA. The pail (TS2PUI100-99) has 300 wipers/case in recloseable pails — ideal for workstations with frequent access. The refill bag (TS2PUI100R-99) has 600 wipers/case in flat resealable bags — double the count per case, lower cost per wipe, and designed for dispenser systems or facilities that open a fresh bag per cleaning session.
When should I use 100% IPA instead of 70% IPA?
100% IPA is required when water content must be strictly controlled — for moisture-sensitive electronic components, optical coatings, semiconductor wafer processing, and processes where the 30% DI water in a 70/30 formulation would cause defects or interfere with subsequent steps. For general surface disinfection and bioburden reduction, 70% IPA is more effective because the water content is necessary for antimicrobial action. Use 100% IPA for process cleanliness; use 70% IPA for disinfection.
What dispenser systems are compatible with the TS2PUI100R-99 refill bags?
The TS2PUI100R-99 refill bags are designed for use with TekniClean® compatible dispenser systems. Contact MTE Solutions to confirm compatibility with your specific dispenser model before ordering refill bags.
Is the TS2PUI100R-99 suitable for flux residue removal after soldering?
Yes — 100% IPA is commonly used for flux residue removal from PCBs and solder joints because it dissolves rosin and water-soluble flux residues effectively without leaving water spots. The refill format is particularly convenient for high-volume PCB cleaning operations where consistent IPA delivery per wipe is critical for repeatable results.
