Transforming Technologies TX40BEWH05 TX4000 ESD Cleanroom Apparel - ESD Soft Sole Boot, White, XL
Transforming Technologies TX40BEWH05 – TX4000 ESD Cleanroom Soft Sole Boot, White, XL
The Transforming Technologies TX40BEWH05 is an ESD soft sole cleanroom boot from the TX4000 ESD Garment System, designed for use in ISO 6 (Class 1000) and stricter controlled environments where both contamination control and electrostatic discharge protection are required. The boot features a three-layer ESD rubber soft sole, Hypalon side wall, and an internal ground ribbon system that electrically connects to a coverall and ground ribbon for a complete body-to-ground ESD path. Meets ANSI/ESD S20.20 and STM9.1 footwear resistive characterization requirements. Reusable and launderable.
Sold individually — $98.30 each. Available in White and Navy; sizes XS through XXL.
Specifications
| Specification | Value |
|---|---|
| Part Number | TX40BEWH05 |
| Series | TX4000 ESD Garment System |
| Color | White |
| Size | XL |
| Available Sizes | XS, S, M, L, XL, XXL |
| Available Colors | White, Navy |
| Fabric | TX4000 ESD Grid — 99% Polyester / 1% Carbon |
| Sole | Three-layer ESD rubber (non-marking inside and outside) |
| Side Wall | Hypalon |
| Closure | 1" elastic and webbing with snap adjustment |
| Ground Ribbon | 18" internal ground ribbon included; 24" available separately |
| ISO Cleanroom Rating | ISO 6 (Class 1000) |
| ESD Standards | ANSI/ESD S20.20, STM9.1 Footwear Resistive Characterization |
| Reusable / Launderable | Yes |
Frequently Asked Questions
How does the TX40BEWH05 provide ESD grounding?
The TX40BEWH05 uses an internal ground ribbon system — an 18" ground ribbon is included with each boot and connects via internal snaps to both the boot and a compatible TX4000 coverall. This creates a continuous electrical path from the operator’s body through the garment system to ground, dissipating electrostatic charge before it can accumulate to damaging levels. The three-layer ESD rubber sole provides the resistive path to ground through the floor surface. For ANSI/ESD S20.20 compliance, the complete grounding path (operator + garment + footwear + flooring) must be verified with a wrist strap and footwear tester.
What ISO cleanroom class is the TX40BEWH05 rated for?
The TX40BEWH05 is rated for ISO 6 (Class 1000) cleanroom environments. The TX4000 ESD Grid fabric (99% polyester / 1% carbon) is a low-linting, controlled-environment material designed to minimize particle generation from the garment system. For ISO 5 and stricter environments, verify that the complete gowning protocol — including boot, coverall, hood, and glove selection — meets your facility’s contamination control validation requirements.
Is the TX40BEWH05 reusable and how should it be laundered?
Yes — the TX40BEWH05 is designed to be reusable and launderable, making it suitable for facilities with documented garment laundering programs. Launder according to Transforming Technologies’ care instructions to maintain ESD performance and fabric integrity. The ground ribbon is replaceable — inspect and replace as needed to ensure continued electrical continuity. Document laundering cycles as part of your ESD garment program records for audit traceability.
What other sizes and colors are available in the TX40BE series?
The TX40BE series ESD soft sole boot is available in White and Navy in sizes XS, S, M, L, XL, and XXL. Color-coded straps on the boot denote size for easy identification in gowning areas. Contact MTE Solutions to confirm availability of specific size and color combinations, or to order the complete TX4000 ESD Garment System including coveralls, hoods, and accessories.
