Teknipure TM-PFM-1T, Foam-Microfiber Flat Mop, Case of 50
Teknipure TM-PFM-1T TekniMop Foam-Microfiber Flat Mop, 5.5 x 15.5 in, Pocket Style, Case of 50
The Teknipure TM-PFM-1T is a pocket-style foam-microfiber flat mop head for cleanroom floor, wall, and ceiling cleaning, rated for ISO Class 4–7 environments. The foam-microfiber construction combines a microfiber cleaning surface — which captures and retains particles, dust, and contamination — with a polyurethane foam core that provides absorbency for wet mopping and cushioning for consistent surface contact across smooth and textured surfaces. The polyester support layer adds structural integrity and durability. At 5.5" x 15.5", the TM-PFM-1T covers a wide cleaning path per pass, reducing the number of passes required to clean a given floor area and minimizing operator fatigue. Pocket-style attachment slides directly onto the TekniMop Velcro frame (TM-516V-1 or TM-516V-SS) for tool-free mop head changes. Sold in cases of 50 for high-volume cleanroom operations.
Sold in cases of 50 mop heads.
Specifications
| SKU | TM-PFM-1T |
|---|---|
| Brand | Teknipure |
| Product Line | TekniMop® |
| Construction | Microfiber cleaning surface / polyurethane foam core / polyester support |
| Attachment Style | Pocket style (slides onto Velcro frame) |
| Mop Head Size | 5.5 in x 15.5 in |
| Compatible Hardware | TM-516V-1 (Velcro Frame & Handle), TM-516V-SS (Stainless Steel Velcro Mop) |
| Cleanroom Rating | ISO Class 4–7 (Fed. Class 10–10,000) |
| Application Surfaces | Floors, walls, ceilings, hoods — smooth or textured |
| Quantity | 50 mop heads/case |
Frequently Asked Questions
What is the advantage of foam-microfiber construction over a standard cleanroom mop?
The foam-microfiber construction combines two complementary cleaning mechanisms: the microfiber surface uses fine filaments to capture and retain particles, dust, and contamination from the floor surface; the foam core provides absorbency for wet mopping with IPA or other cleaning solutions and cushioning that maintains consistent surface contact across uneven or textured floors. Standard mop materials typically optimize for one property — foam-microfiber provides both in a single mop head, making it the preferred choice for ISO Class 4–7 cleanroom floor maintenance.
What mop hardware is compatible with the TM-PFM-1T?
The TM-PFM-1T uses a pocket-style attachment that slides directly onto the TekniMop Velcro frame. Compatible hardware includes the TM-516V-1 (standard Velcro frame and handle, 1/case) and the TM-516V-SS (stainless steel Velcro mop frame and handle, 60"). The pocket-style design allows tool-free mop head changes — simply slide the used head off and slide a fresh head on without touching the mop surface.
Can the TM-PFM-1T be used for both wet and dry mopping?
Yes — the foam core provides absorbency for wet mopping with IPA, DI water, or other approved cleanroom cleaning solutions, while the microfiber surface is effective for dry mopping to capture and retain particles and dust. For wet mopping, pre-saturate the mop head with the cleaning solution before use; for dry mopping, use the mop head dry to capture particulate contamination from the floor surface.
How many mop heads should I stock per cleaning cycle?
The number of mop heads required depends on the floor area, ISO class, and cleaning protocol. A general guideline for ISO Class 5 environments is to change mop heads every 20–30 square meters of floor area to prevent cross-contamination from a saturated or contaminated mop head. With 50 heads per case, the TM-PFM-1T case format supports high-volume cleanroom operations and regular mop head rotation schedules.
