Thermaltronics TMT-9000S-1 Soldering System with SHP-1, 100–110V
Thermaltronics TMT-9000S-1 Soldering System with SHP-1, 100–110V
Listed lead time: 3–4 weeks. Contact MTE Solutions to confirm current availability before ordering. Power cord not included in this listing.
The Thermaltronics TMT-9000S-1 is a 100–110VAC soldering system with an SHP-1 handpiece, SHH-1 sleep workstand and M Series cartridge compatibility. Curie Heat Technology operates at 13.56MHz and automatically adjusts power output to respond to the thermal demands of the solder joint. The power supply features a built-in LCD and dual switchable soldering ports, with a maximum 40W RF output.
The manufacturer's packing list includes an M7CH176 soldering tip cartridge. Dual switchable ports should not be interpreted as two simultaneously powered tools or two included handpieces: the listed package contains one SHP-1 handpiece.
Best Uses / Applications
- PCB assembly and electronics soldering with appropriate M Series cartridges.
- Service and repair benches using a verified 100–110VAC supply.
- Prototype work requiring cartridge geometries matched to different joints.
- Workstations requiring selectable handpiece connections and an LCD-equipped supply.
- Bench standardization around the SHP-1 handpiece and M Series cartridge family.
Key Features
- Curie Heat Technology automatically regulates power in response to joint demand.
- Maximum 40W RF output at 13.56MHz.
- Built-in 60 × 16mm LCD display.
- Dual switchable soldering ports.
- SHP-1 soldering handpiece and SHH-1 sleep workstand.
- M7CH176 cartridge included in the vendor packing list.
- Idle temperature stability of ±1.1°C / ±2°F.
Technical Specifications
| Manufacturer | Thermaltronics |
|---|---|
| System model | TMT-9000S-1 |
| Power-supply configuration | TMT-9000PS-1 |
| Input voltage | 100–110VAC |
| Input frequency | 50/60Hz |
| Maximum output power | 40W RF |
| Output frequency | 13.56MHz |
| Tip-to-ground potential | 2mV, true RMS, 50–500Hz |
| Tip-to-ground resistance | Less than 2Ω DC |
| Idle temperature stability | ±1.1°C / ±2°F |
| Ambient operating temperature | 10–40°C / 50–104°F |
| Maximum enclosure temperature | 50°C / 122°F; not soldering-tip temperature |
| Fuse, -1 power supply | 250V, 1A |
| Dimensions, W × H × D | 212.4 × 118 × 132mm |
| Listed unit weight | 3.47kg; not shipping weight |
| LCD dimensions | 60 × 16mm |
| Tip family | M Series |
Package Contents
| Reference | Item |
|---|---|
| TMT-9000PS | Power supply; -1 voltage configuration for this system |
| SHH-1 | Sleep workstand |
| SHP-1 | Soldering handpiece |
| RMP-1 | Tip removal pad |
| SG-1-HRB | Heat-resistant grip |
| SG-1-GR | Green handpiece grip |
| SG-1-GY | Gray handpiece grip |
| BC-1 | Brass curls |
| SPG-1 | Sulphide-free sponge |
| M7CH176 | Soldering tip cartridge |
Power cord is excluded according to this listing. Confirm a suitable cord and current package contents before ordering. Additional handpieces and cartridges are separate unless specifically included in your quotation.
TMT-9000S-1 vs. TMT-9000S-2
| Consideration | TMT-9000S-1 | TMT-9000S-2 |
|---|---|---|
| Input voltage | 100–110VAC | 220–240VAC |
| Power-supply reference | TMT-9000PS-1 | TMT-9000PS-2 |
| Fuse specification | 250V, 1A | 250V, 0.5A |
| Platform tip family | M Series | M Series |
These are separate voltage configurations, not universal 100–240V units. Check the equipment label and supply before connection. For replacement of another manufacturer's station, verify each handpiece, cartridge and accessory individually; matching RF frequency alone does not establish drop-in compatibility.
Setup and Maintenance
Verify supply voltage and power-cord suitability before installation. Match M Series cartridge geometry and temperature grade to the alloy, joint and component. Follow Thermaltronics' port-selection, sleep-workstand, cartridge-change and shutdown instructions. Use suitable fume control and keep the tip clean and tinned. Avoid excessive pressure, impact or abrasive damage to plated working surfaces. Automatic regulation does not replace safe-handling training or facility process checks.
Frequently Asked Questions
What voltage does the TMT-9000S-1 require?
Thermaltronics specifies 100–110VAC for the -1 power supply. Verify the equipment label and installation supply before use.
How is the -2 version different?
The -2 power supply is specified for 220–240VAC and uses a 250V, 0.5A fuse. The -1 uses a 250V, 1A fuse.
Which handpiece and tips does it use?
The package includes an SHP-1 handpiece and uses Thermaltronics M Series cartridges.
Is a soldering tip included?
Yes. The manufacturer's current packing list names the M7CH176 soldering tip cartridge.
Do dual ports mean two operators can solder simultaneously?
The manufacturer describes the ports as dual switchable. Do not interpret that as simultaneous dual-tool power. One SHP-1 handpiece is listed in the package.
Is the power cord included?
No. This listing excludes the power cord. Confirm the correct cord for your installation.
Is it a verified drop-in replacement for my Metcal setup?
Do not assume every handpiece or cartridge is interchangeable. Confirm exact station, handpiece and cartridge references before replacing equipment or reusing accessories.
What is the expected lead time?
This listing carries a 3–4 week notice. Contact MTE Solutions to confirm availability and delivery expectations.
