Thermaltronics TM60CH177 Chisel Solder Tip 30°, 1.5mm (0.06") — 600 Series
Thermaltronics TM60CH177 — Chisel Solder Tip, 30°, 1.5mm (0.06"), 600 Series
The Thermaltronics TM60CH177 is a 600 Series chisel soldering tip designed for temperature-sensitive soldering applications. The 30-degree chisel profile and 1.5mm (0.06") tip width make it well suited for drag soldering, component lead tinning, through-hole work, and pad soldering on standard-density PCBs. Compatible with the Thermaltronics TMT-5000S-1 and TMT-5000S-2 soldering systems. Lead time is typically 3–4 weeks — order ahead to maintain stock.
Key Specifications
| Specification | Value |
| Part Number / SKU | TM60CH177 |
| Series | 600 Series (temperature-sensitive applications) |
| Tip Style | Chisel, 30° |
| Tip Width | 1.5mm (0.06") |
| Tip Length | 10.0mm (0.39") |
| Compatible Stations | Thermaltronics TMT-5000S-1, TMT-5000S-2 |
| Lead Time | 3–4 weeks (order ahead) |
Soldering Tip Care Guide
Proper tip care extends tip life and maintains thermal transfer efficiency. Follow these practices to maximize performance of the TM60CH177:
- Tin the tip before and after each use — always apply a coat of fresh solder to the tip before setting down the iron and at the end of each session. This protective solder coat prevents oxidation while the tip is idle or cooling.
- Use brass wire tip cleaners — brass wool cleaners (such as the Hakko 599B or equivalent) remove flux residue without thermal shock. Avoid wet sponges where possible — repeated thermal cycling from wet cleaning accelerates tip wear.
- Never dry-wipe an uncoated tip — wiping a bare tip on a dry surface abrades the plating and accelerates dewetting.
- Keep temperatures as low as practical — the 600 Series is designed for temperature-sensitive work. Operating at the lowest effective temperature reduces tip oxidation rate and extends usable life.
- Use tip tinner/activator for oxidized tips — if the tip shows signs of dewetting (solder beading off the surface), use a tip tinner compound to restore the tinned surface before the tip becomes unusable.
- Replace tips showing cracks, pitting, or persistent dewetting — a damaged tip transfers heat poorly and produces unreliable joints. Continued use accelerates damage to the handpiece.
Frequently Asked Questions
What is the Thermaltronics 600 Series and how does it differ from the 700 Series?
Thermaltronics 600 Series tips are designed for temperature-sensitive soldering applications where precise, controlled heat delivery is critical — such as fine-pitch SMD components, heat-sensitive substrates, and delicate connectors. The 700 Series tips are designed for higher-mass soldering tasks that require more aggressive heat delivery. For most standard PCB assembly and rework, the 600 Series provides the right balance of thermal performance and control.
What stations is the TM60CH177 compatible with?
The TM60CH177 is compatible with the Thermaltronics TMT-5000S-1 and TMT-5000S-2 soldering stations. It is not compatible with other Thermaltronics station lines without a compatible handpiece. Contact MTE Solutions to confirm compatibility with your specific Thermaltronics configuration.
When is a 30-degree chisel tip the right choice?
A 30-degree chisel tip offers a flat, angled working surface that is effective for drag soldering rows of through-hole or SMD leads, pad tinning, wire termination, and general-purpose lead soldering. The 1.5mm width of the TM60CH177 is a versatile size suitable for standard-pitch components without being too wide for moderate-density boards. For very fine-pitch work under 0.5mm pitch, a conical or needle tip is typically preferred.
Why does the TM60CH177 have a 3–4 week lead time?
Thermaltronics 600 Series tips are manufactured to order and are not stocked in high volume at the distributor level. The 3–4 week lead time reflects standard production and fulfillment time from Thermaltronics. If your operation depends on this tip, MTE Solutions recommends maintaining a small on-hand stock and ordering replenishment before your current supply runs low.
