Teknipure TekniClean TS2PL2I70-99, LX Polyester Knit 9″ x 9″ Wipes, 70% IPA
Teknipure TS2PL2I70-99 TekniClean LX Presaturated Polyester Knit Wiper, 9 x 9 in, 70% IPA, Case of 300
The Teknipure TS2PL2I70-99 is a presaturated 100% polyester knit cleanroom wiper from the TekniClean LX line, 9" x 9", presaturated with 70% isopropyl alcohol / purified water (UPW) using Teknipure’s AccuSat precision saturation system, with laser-sealed edges, rated for ISO Class 4+ environments. The TekniClean LX designation indicates Teknipure’s ultra-clean proprietary manufacturing process achieving the ultra-low particle shedding and ultra-low ionic and NVR residuals required for ISO Class 4–5 semiconductor, advanced optics, and pharmaceutical cleanrooms. Laser-sealed edges provide cleaner, more precise edge sealing than ultrasonic methods — minimizing edge-shed particles and fibers at the wiper perimeter. The AccuSat presaturation system delivers precise, consistent 70% IPA / UPW saturation to every wiper in the pail, ensuring uniform cleaning performance and reducing solvent usage compared to manual saturation. 70% IPA is the standard concentration for broad-spectrum surface disinfection in cleanrooms. Packaged in recloseable pails to preserve IPA saturation level. 150 wipers/pail, 2 pails/case = 300 wipers/case.
Sold in cases of 300 wipers (150/pail, 2 pails/case).
Specifications
| SKU | TS2PL2I70-99 |
|---|---|
| Brand | Teknipure |
| Product Line | TekniClean® LX |
| Wiper Material | 100% polyester knit |
| Wiper Size | 9 in x 9 in |
| Edge Type | Laser-sealed |
| Saturation Solution | 70% IPA / purified water (UPW), AccuSat precision saturation |
| Sterility | Non-sterile |
| Packaging | 150/pail, 2 pails/case, 300 wipers/case |
| Packaging Type | Recloseable pail |
| Cleanroom Rating | ISO Class 4+ (Class 10+) |
| Extractables | Ultra-low NVR, ultra-low ions (TekniClean LX ultra-clean process) |
| Application | Surface disinfection, equipment wiping, solvent application/removal in ISO Class 4–8 cleanrooms |
| Industries | Semiconductor/microelectronics, pharmaceutical/biologics, medical device/optics, aerospace/defense, laboratories |
Frequently Asked Questions
What is AccuSat presaturation and why does it matter?
AccuSat is Teknipure’s precision saturation system that delivers a precise, consistent IPA concentration to every wiper in the pail. Inconsistent saturation — common with manual or less controlled presaturation methods — results in wipers that are too wet (wasting solvent and leaving excess residue) or too dry (reducing cleaning effectiveness). AccuSat ensures uniform 70% IPA concentration across all 150 wipers in the pail, providing consistent cleaning performance and reducing overall solvent usage.
What is the advantage of laser-sealed edges over ultrasonic-sealed edges?
Laser sealing provides a more precise, cleaner edge seal than ultrasonic methods, with tighter control over the seal width and edge geometry. This minimizes the amount of wiper material at the sealed edge that could potentially shed particles or fibers during use. For ISO Class 4–5 environments where edge-shed is a critical contamination source, laser-sealed edges provide an additional margin of cleanliness assurance over standard ultrasonic-sealed wipers.
When should I use the TS2PL2I70-99 (70% IPA) vs. the TS2PUI09-99 (9% IPA) presaturated wiper?
70% IPA is the standard concentration for broad-spectrum surface disinfection — use the TS2PL2I70-99 for routine disinfection of cleanroom surfaces, equipment, and tools where broad-spectrum antimicrobial activity is required. 9% IPA (TS2PUI09-99) is a low-concentration formulation used for routine maintenance cleaning between disinfection cycles where a lower alcohol concentration is specified by SOP. Always follow your facility’s validated cleaning and disinfection SOP to determine the correct IPA concentration for each application step.
How does TekniClean LX differ from standard TekniClean wipers?
TekniClean LX uses Teknipure’s ultra-clean proprietary manufacturing process that achieves lower particle shedding and lower ionic and NVR residuals than standard TekniClean wipers. The LX line is designed for ISO Class 4+ environments where standard cleanroom wipers cannot meet the required cleanliness levels. If your process is ISO Class 5–8, standard TekniClean wipers may be sufficient; for ISO Class 4 and critical ISO Class 5 applications, the LX line provides the additional cleanliness margin required.
