Teknipure TKS506E Small Foam ESD Swab, 3.524"(8.95 cm), 2500 per case

Teknipure TKS506E Small Foam ESD Swab, 3.524" (8.95 cm), 2500 Swabs/Case

The Teknipure TKS506E is a small foam ESD (electrostatic discharge) safe cleanroom swab designed for general-purpose precision cleaning of ESD-sensitive components in electronics assembly and ISO-classified cleanroom environments. The small round foam tip provides effective fluid absorption and controlled solvent release for cleaning PCB surfaces, connector contacts, IC packages, and other sensitive components without generating electrostatic charge. The static-dissipative construction protects ESD-susceptible devices from damage during the cleaning process. At 3.524 inches (8.95 cm), the TKS506E is a versatile everyday ESD swab for benchtop electronics cleaning. Sold in cases of 2500 swabs.

Sold in cases of 2500 swabs.

Specifications

Frequently Asked Questions

What makes the TKS506E ESD safe?

The TKS506E is constructed with static-dissipative materials throughout the swab body and tip, allowing electrostatic charge to dissipate safely rather than discharge suddenly across sensitive components. This is critical when cleaning ICs, SMDs, MOSFETs, and other ESD-susceptible devices where even a small discharge can cause latent or immediate component failure. Always use ESD swabs as part of a complete ESD control program including grounded mats, wrist straps, and ESD-safe workstations.

How does the TKS506E differ from the TKS505E and TKS507E?

All three are ESD foam swabs in the Teknipure TKS5xxE series at similar lengths. The TKS505E (3.484") has a pointed foam tip for targeted access to fine-pitch leads and tight spaces. The TKS506E (3.524") has a small round foam tip suited for general surface cleaning. The TKS507E (3.583") also has a small foam tip but is slightly longer. Choose the TKS506E for everyday ESD-safe cleaning where a small round tip and high case count are the priority.

What solvents are compatible with the TKS506E ESD foam tip?

Teknipure ESD foam swabs are compatible with isopropyl alcohol (IPA), deionized water, and most mild cleaning agents used in electronics assembly. For aggressive solvents such as acetone, MEK, or strong acids, verify compatibility before use as these may degrade the foam tip or affect the static-dissipative properties. Contact MTE Solutions for application-specific guidance.

Can the TKS506E be used dry?

Yes — the TKS506E can be used dry for light dust removal and surface wiping on ESD-sensitive components. For flux residue removal, adhesive cleanup, or more thorough contamination control, pre-wetting with IPA or a dedicated electronics cleaner will provide more effective results. The ESD-safe construction remains effective whether used dry or wetted.