Teknipure TKS505E Pointed Foam ESD Swab, 3.484"(8.85 cm), 2500 swabs/case

Teknipure TKS505E Pointed Foam ESD Swab, 3.484" (8.85 cm), 2500 Swabs/Case

The Teknipure TKS505E is a pointed foam ESD (electrostatic discharge) safe cleanroom swab designed for precision cleaning of ESD-sensitive components in electronics assembly and ISO-classified cleanroom environments. The pointed foam tip provides targeted access to fine-pitch connector pins, IC leads, SMD component gaps, and other tight spaces where a broader tip would make inadequate contact. The static-dissipative construction prevents charge buildup during use, protecting sensitive devices from electrostatic damage. At 3.484 inches (8.85 cm), the TKS505E offers a comfortable working length for benchtop ESD-safe cleaning tasks. Sold in cases of 2500 swabs.

Sold in cases of 2500 swabs.

Specifications

Frequently Asked Questions

What makes the TKS505E ESD safe?

The TKS505E is constructed with static-dissipative materials throughout the swab body and tip, allowing electrostatic charge to dissipate safely rather than discharge suddenly across sensitive components. This is critical when cleaning ICs, SMDs, MOSFETs, and other ESD-susceptible devices where even a small discharge can cause latent or immediate component failure. Always use ESD swabs as part of a complete ESD control program including grounded mats, wrist straps, and ESD-safe workstations.

How does the pointed tip compare to other ESD swab tip geometries?

The pointed tip on the TKS505E provides more targeted access than a round or flat foam tip, making it effective for cleaning between fine-pitch leads, inside connector housings, and around small SMD components. It is less fine than the micro pick tip on the TKS502E but more precise than the small round tip on the TKS506E and TKS507E. Choose the TKS505E when a pointed tip with moderate swab length is the right balance for your application.

How does the TKS505E compare to the TKS506E and TKS507E?

All three are ESD foam swabs in the Teknipure TKS5xxE series. The TKS505E (3.484") has a pointed tip for targeted access. The TKS506E (3.524") has a small round foam tip for general ESD-safe surface cleaning. The TKS507E (3.583") also has a small foam tip but is slightly longer. Choose based on tip geometry and the access requirements of your specific cleaning application.

What solvents are compatible with the TKS505E ESD foam tip?

Teknipure ESD foam swabs are compatible with isopropyl alcohol (IPA), deionized water, and most mild cleaning agents used in electronics assembly. For aggressive solvents such as acetone, MEK, or strong acids, verify compatibility before use as these may degrade the foam tip or affect the static-dissipative properties. Contact MTE Solutions for application-specific guidance.