Permabond TA04610K400C0101 - TA4610 Toughened Acrylic Adhesive 400ml 2-Part 1:1 (6/Case)
Permabond TA4610 — Toughened Acrylic Adhesive | 400ml Dual Cartridge | Case of 6
Permabond TA4610 is a two-part toughened acrylic structural adhesive engineered to bond low surface energy plastics (polypropylene, polyethylene) without primer or surface treatment — as well as metals, composites, and dissimilar material combinations. Cures at room temperature with fast fixture time and delivers exceptional impact, peel, and vibration resistance. The 400ml dual-cartridge format is designed for production-volume dispensing with manual or pneumatic guns.
Case of 6 × 400ml dual cartridges. Static mixer nozzles included. For industrial use only.
Specifications
| Part Number | TA04610K400C0101 |
|---|---|
| Type | Two-part toughened acrylic adhesive (methyl methacrylate) |
| Mix Ratio | 1:1 by volume |
| Cartridge Size | 400ml dual cartridge |
| Packaging | Case of 6 cartridges |
| Cure | Room temperature; full cure 24 hours |
| Substrates | PP, PE, ABS, PVC, PC, metals, composites, ceramics, glass |
| Surface Prep Required | Not required for PP/PE and most substrates |
| Static Mixer | Included with each cartridge |
| Manufacturer | Permabond Engineering Adhesives |
Documentation:
Key Features
- Bonds low surface energy plastics without primer — direct adhesion to polypropylene (PP) and polyethylene (PE) with no flame, plasma, or primer treatment required
- Superior impact & peel resistance — toughened formulation absorbs shock and dynamic loading where rigid adhesives crack
- 1:1 mix ratio — compatible with standard 400ml dual-cartridge dispensing guns; static mixer included
- Fast fixture time — rapid handling strength for high-throughput production environments
- Gap filling — fills uneven or poorly fitting surfaces up to several millimeters
- Bonds dissimilar materials — plastic-to-metal, composite-to-plastic, and mixed-material joints
- Vibration resistance — maintains bond integrity under cyclic loading and mechanical stress
Bondable Substrates
| Substrate Category | Examples |
|---|---|
| Low Surface Energy Plastics (no primer) | Polypropylene (PP), Polyethylene (PE) |
| Engineering Plastics | ABS, PVC, Polycarbonate, Acrylic (PMMA) |
| Composites & Laminates | Fiberglass, carbon fiber composites |
| Metals | Aluminum, steel, stainless steel, painted surfaces |
| Other | Wood, MDF, ceramics, glass |
Industries & Applications
- Automotive plastic component assembly and repair
- Electronics enclosure and housing bonding
- Appliance manufacturing — plastic housings, trim panels
- Marine and RV assembly — PP tanks, fittings, hulls
- Industrial equipment repair and maintenance
- Composite panel and structural bonding
- Sign and display fabrication
- Replacing mechanical fasteners in lightweight assemblies
Permabond Toughened Acrylic Comparison
| Product | Mix Ratio | Size Options | Best For |
|---|---|---|---|
| TA4605 | 1:1 | 50ml, 400ml | General toughened acrylic bonding, standard substrates |
| TA4610 | 1:1 | 50ml, 400ml | PP/PE bonding without primer, high impact & peel — this listing |
Frequently Asked Questions
What is Permabond TA4610?
Permabond TA4610 is a two-part, 1:1 mix ratio toughened acrylic (methyl methacrylate) structural adhesive. Its key advantage over standard structural adhesives is direct adhesion to low surface energy plastics like polypropylene and polyethylene without primers, flame treatment, or plasma treatment. It is widely used in automotive, industrial, and assembly applications.
Does TA4610 really bond polypropylene and polyethylene without primer?
Yes — this is TA4610’s primary differentiator. Standard adhesives cannot wet out PP or PE surfaces due to their low surface energy. TA4610’s toughened acrylic chemistry achieves direct adhesion to these difficult substrates without surface activation, eliminating costly preparation steps in production.
How does Permabond TA4610 differ from standard epoxy adhesives?
TA4610 is a toughened acrylic (MMA), not an epoxy. It delivers higher impact, peel, and vibration resistance than rigid epoxies, and crucially, it bonds low surface energy plastics that epoxies cannot adhere to without priming. Epoxies offer higher static shear strength but are more brittle under dynamic loading.
What is the difference between the 50ml and 400ml TA4610 kits?
The chemistry and performance are identical. The 50ml kit (TA04610K050C0101, case of 10) is suited for bench repair, prototyping, and low-volume use. The 400ml kit (TA04610K400C0101, case of 6) is designed for production-volume dispensing with standard 400ml pneumatic or manual dispensing guns.
What dispensing equipment is needed for the 400ml cartridge?
A standard 400ml dual-component dispensing gun with a 1:1 ratio barrel is required. Manual and pneumatic options are available. The static mixing nozzle is included with each cartridge. Contact MTE Solutions at 651.600.3838 for compatible dispensing gun recommendations.
What is the full cure time for Permabond TA4610?
TA4610 achieves fast fixture strength within minutes at room temperature and reaches full cure in approximately 24 hours. Higher temperatures accelerate cure. Consult the TDS for exact fixture and cure times at various temperatures and gap thicknesses.
Learn More:
