Dymax T16307 Filter Regulator With Dump Valve
Dymax T16307 – Filter Regulator with Dump Valve | SD-100 Dispenser Accessory
The Dymax T16307 is a filter regulator with dump valve designed as a recommended accessory for the Dymax SD-100 fluid dispenser. It conditions and regulates incoming air supply to the dispenser, filtering contaminants and maintaining consistent pressure for precise fluid dispensing. The integrated dump valve allows the air supply to be safely vented when the dispenser is not in use.
Sold individually.
Lead Time: There is currently a lead time of 1–2 weeks on this item.
Specifications
| Part Number | T16307 |
| Type | Filter regulator with dump valve |
| Compatible System | Dymax SD-100 fluid dispenser (recommended accessory) |
| Function | Air filtration, pressure regulation, and air dump/vent |
| Lead Time | 1–2 weeks |
| Manufacturer | Dymax Corporation |
Frequently Asked Questions
What is the Dymax SD-100 and why does it need a filter regulator?
The Dymax SD-100 is a pneumatic fluid dispenser used for precise dispensing of UV-cure adhesives, sealants, and coatings in electronics assembly and medical device manufacturing. Pneumatic dispensers require clean, regulated air to operate accurately — unregulated or contaminated air can cause inconsistent shot volumes, pressure spikes, or damage to the dispenser. The T16307 filter regulator conditions the air supply to protect the SD-100 and ensure repeatable dispensing performance.
What does the dump valve do on the T16307?
The dump valve (also called a pressure relief or exhaust valve) allows the pressurized air in the system to be safely vented when the dispenser is shut down or not in use. This prevents residual pressure from causing unintended fluid discharge from the dispenser tip and allows safe disconnection of air lines during maintenance or material changeover.
Can the T16307 be used with other Dymax dispensers besides the SD-100?
The T16307 is specifically recommended for the SD-100. Compatibility with other Dymax dispensers depends on the air inlet specifications and pressure requirements of each system. Contact MTE Solutions or Dymax directly to confirm compatibility with other dispenser models before ordering.
Why is there a 1–2 week lead time on this item?
The T16307 is a specialty accessory sourced directly from Dymax Corporation and is not stocked in high volume. Lead times reflect standard order processing and shipping from Dymax. Contact MTE Solutions if you have an urgent requirement and we will confirm current availability and expedite options.
