Teknipure TS3PBI10-99, TekniClean Pro Polyester Pre-Saturated Wiper 10% IPA, 9 x 9 in, Case of 200
Teknipure TS3PBI10-99 TekniClean® Pro Presat Polyester Knit Wiper, Sealed Border, 10% IPA/90% DIW, 9 in x 9 in, Case of 200
The Teknipure TS3PBI10-99 TekniClean® Pro Presat is a presaturated 100% polyester knit cleanroom wiper with a sealed border in the standard 9"x9" format, pre-wetted with 10% isopropyl alcohol / 90% deionized water, packaged in recloseable pails, rated for ISO Class 2–7 environments. The 10% IPA formulation is used in pharmaceutical and biotech cleanrooms where high-concentration IPA would leave excessive solvent residue, as a follow-up wipe after sporicidal disinfectant application (to remove sporicidal residue without reintroducing high IPA concentration), and in protocols requiring a low-concentration alcohol wipe as part of a validated multi-step disinfection sequence. The Pro line’s sealed border provides a wider perimeter seal than a standard sealed edge for maximum fiber contamination control. IPA is 0.2μm filtered. Store at 59°F–86°F (15°C–30°C).
Sold in cases of 200 wipers (100 wipers/pail, 2 pails/case).
Specifications
| SKU | TS3PBI10-99 |
|---|---|
| Brand | Teknipure |
| Product Line | TekniClean® Pro Presat |
| Construction | 100% polyester knit, TC3 Pro double-knit construction, sealed border |
| Size | 9 in x 9 in (22.9 cm x 22.9 cm) |
| Saturation | 10% IPA / 90% deionized water (0.2μm filtered) |
| Packaging | 100 wipers/pail, 2 pails/case, 200 wipers/case (recloseable pail) |
| Cleanroom Rating | ISO Class 2–7 (Grades A–D, Class <1–10,000) |
| Shelf Life | 3 years from date of manufacture |
| Storage Conditions | 59°F–86°F (15°C–30°C), ambient conditions |
| Application | Post-sporicidal residue removal, low-concentration alcohol wipe steps in validated disinfection sequences, final rinse wiping, pharmaceutical and biotech cleanroom protocols |
| Industries | Pharmaceutical (aseptic processing), biotech, medical device, compounding pharmacy (USP <797>/<800>) |
Frequently Asked Questions
When would I use 10% IPA instead of 70% IPA for cleanroom wiping?
10% IPA is used in specific pharmaceutical and biotech disinfection protocols where high-concentration IPA is not appropriate — most commonly as a follow-up wipe after sporicidal disinfectant application (such as VHP, chlorine dioxide, or peracetic acid-based sporicides) to remove sporicidal residue from surfaces without reintroducing a high solvent load. It is also used in validated multi-step disinfection sequences where a low-concentration alcohol wipe is specified as a distinct step. For general surface disinfection and bioburden reduction, 70% IPA (TS3PBI70-99) is the standard choice. Always follow your facility’s validated cleaning and disinfection SOP to determine the correct IPA concentration for each step.
What is the difference between the Pro Presat 10% IPA (TS3PBI10-99) and the standard Presat 9% IPA (TS2PUI09R-99)?
Both are low-concentration IPA presaturated wipers used in similar pharmaceutical disinfection protocol steps, but they differ in IPA concentration (10% vs. 9%), wiper construction, and packaging format. The TS3PBI10-99 uses TC3 Pro heavy construction with a sealed border in a pail format (200/case). The TS2PUI09R-99 uses TC2 standard construction with a sealed edge in a refill bag format. Consult your validated SOP to confirm which concentration is specified before ordering.
Is the TS3PBI10-99 suitable for USP <797> and USP <800> compounding pharmacy cleanrooms?
Yes — the TS3PBI10-99 is used in compounding pharmacy cleanrooms operating under USP <797> and USP <800> where a low-concentration IPA wipe step is part of the validated disinfection sequence. Always verify that the specific IPA concentration and wiper construction meet your facility’s validated protocol requirements before substituting products.
What does the sealed border provide vs. a standard sealed edge in a presaturated wiper?
A sealed border extends the fused zone further inward from the perimeter than a standard sealed edge, creating a wider contamination-free margin around the entire wiper. In a presaturated wiper, this is particularly important because the IPA saturation can cause fibers at the wiper edge to swell and shed more readily during use — the wider sealed border mitigates this risk and maintains low fiber generation throughout the wiper’s use.
