Teknipure TS2PUI09R-99 TekniClean Presat Polyester Knit Wipe Refill, 9% IPA/91% DIW, 9"x9" Case of 600
Teknipure TS2PUI09R-99 TekniClean® Presat Polyester Knit Wiper Refill, 9% IPA/91% DIW, 9 in x 9 in, Case of 600
The Teknipure TS2PUI09R-99 TekniClean® Presat Refill is a presaturated 100% polyester knit cleanroom wiper with a sealed edge in the standard 9"x9" format, pre-wetted with 9% isopropyl alcohol / 91% deionized water, packaged in flat resealable bags for use with TekniClean® dispenser systems or as a high-count flat-bag format, rated for ISO Class 2–7 environments. The 9% IPA formulation is used in pharmaceutical and biotech cleanrooms as a follow-up wipe after sporicidal disinfectant application — removing sporicidal residue (VHP, chlorine dioxide, peracetic acid-based agents) from surfaces without reintroducing a high solvent load — and in validated multi-step disinfection sequences where a low-concentration alcohol wipe step is specified. IPA is 0.2μm filtered. Store at 59°F–86°F (15°C–30°C).
Sold in cases of 600 wipers (50 wipers/bag, 12 bags/case).
Specifications
| SKU | TS2PUI09R-99 |
|---|---|
| Brand | Teknipure |
| Product Line | TekniClean® Presat Refill |
| Construction | 100% polyester knit, continuous-filament, sealed edge |
| Size | 9 in x 9 in (22.9 cm x 22.9 cm) |
| Saturation | 9% IPA / 91% deionized water (0.2μm filtered) |
| Packaging | 50 wipers/bag, 12 bags/case, 600 wipers/case (resealable flat bags) |
| Cleanroom Rating | ISO Class 2–7 (Grades A–D, Class <1–10,000) |
| Shelf Life | 3 years from date of manufacture |
| Storage Conditions | 59°F–86°F (15°C–30°C), ambient conditions |
| Application | Post-sporicidal residue removal, low-concentration alcohol wipe steps in validated disinfection sequences, pharmaceutical and biotech cleanroom protocols |
| Industries | Pharmaceutical (aseptic processing), biotech, medical device, compounding pharmacy (USP <797>/<800>) |
Frequently Asked Questions
When would I use 9% IPA instead of 70% IPA for cleanroom wiping?
9% IPA is used in specific pharmaceutical and biotech disinfection protocols as a follow-up wipe after sporicidal disinfectant application — such as VHP (vaporized hydrogen peroxide), chlorine dioxide, or peracetic acid-based sporicides — to remove sporicidal residue from surfaces without reintroducing a high solvent load. It is also used in validated multi-step disinfection sequences where a low-concentration alcohol wipe is specified as a distinct step. For general surface disinfection and bioburden reduction, 70% IPA is the standard choice. Always follow your facility’s validated cleaning and disinfection SOP to confirm the correct IPA concentration for each step.
What is the difference between the 9% IPA refill (TS2PUI09R-99) and the Pro Presat 10% IPA pail (TS3PBI10-99)?
Both are low-concentration IPA presaturated wipers used in similar pharmaceutical disinfection protocol steps, but they differ in IPA concentration (9% vs. 10%), wiper construction, and packaging format. The TS2PUI09R-99 uses TC2 standard construction with a sealed edge in a refill bag format (600/case). The TS3PBI10-99 uses TC3 Pro heavy construction with a sealed border in a pail format (200/case). Consult your validated SOP to confirm which concentration and wiper construction are specified before ordering.
Is the TS2PUI09R-99 compatible with dispenser systems?
Yes — the refill bag format (50 wipers/bag) is designed for use with TekniClean® compatible dispenser systems. Contact MTE Solutions to confirm compatibility with your specific dispenser model before ordering.
Is a sterile version of this low-concentration IPA wiper available?
Contact MTE Solutions for availability of sterile presaturated wipers in low-concentration IPA formulations for aseptic processing areas requiring both sterility and low-concentration alcohol wipe steps in validated disinfection sequences.
