JBC NAE-1C 120V 2-Tool Nano Control Unit
JBC NAE-1C 120V 2-Tool Nano Control Unit
The JBC NAE-1C is the 120V configuration of the NAE 2-Tool Nano Control Unit for precision soldering and desoldering processes. It operates two compatible nano tools simultaneously, with peak power of 14W per tool and selectable temperature from 90–450°C. This listing is for the control unit, not a complete station supplied with handpieces.
JBC lists compatibility with the NT115 Nano Handle, NP115 Nano Tweezers and AN115 Adjustable Nano Tweezers. Choose the tools, compatible cartridges and supporting accessories separately to match your process. The menu provides more than ten configurable parameters, while USB connections support firmware updates, graphics, profiles and PC communications.
Best Uses / Applications
- Building a precision electronics soldering or rework setup around compatible JBC nano tools.
- Operating two compatible tools simultaneously from one control unit.
- Fine electronics repair and laboratory work requiring nano handles or tweezers selected for the task.
- Replacing a control unit in a verified compatible nano-tool setup.
- Engineering and production benches requiring configurable process parameters and PC communications.
Key Features
- NAE-1C 120V control-unit configuration.
- Simultaneous operation of two compatible tools.
- 14W peak power per tool.
- 90–450°C / 190–840°F selectable temperature.
- JBC heating system and Hibernation Mode.
- Compatibility with NT115, NP115 and AN115 tools.
- USB-A firmware, graphics and profile functions; USB-B PC communications.
- FAE / Robot connector for remote control or compatible FAE fume extractor connection.
- One pedal connector for each tool.
Technical Specifications
| Specification | Value |
|---|---|
| Manufacturer / SKU | JBC / NAE-1C |
| Product type | 2-Tool Nano Control Unit |
| Input voltage configuration | 120V |
| Tool operation | Two compatible tools simultaneously |
| Peak power | 14W per tool |
| Selectable temperature | 90–450°C / 190–840°F |
| Temperature accuracy | ±3% |
| Compatible tools | NT115 Nano Handle, NP115 Nano Tweezers, AN115 Adjustable Nano Tweezers |
| Tip-to-ground resistance | Less than 2 ohms |
| Tip-to-ground voltage | Less than 2mV RMS |
| ESD designation | Manufacturer lists ESD safe, meeting ANSI/ESD S20.20-2021 |
| Equipotential bonding | Connection to EPA |
| USB-A | Firmware update; graphics and profiles |
| USB-B | PC communications |
| FAE / Robot connector | Remote control or FAE fume extractor connection |
| Pedal connections | One for each tool |
| Control unit dimensions | 140 × 170 × 125mm / 5.51 × 6.69 × 4.92in |
| Control unit weight | 2.12kg / 4.67lb |
| Manufacturer package dimensions | 280 × 280 × 164mm / 11.02 × 11.02 × 6.46in |
| Manufacturer package weight | 3.31kg / 7.30lb; not a shipping quotation |
Package Contents and Required Accessories
JBC's product composition lists one NAE 2-Tool Nano Control Unit and an instruction manual. Tools, cartridges, tool stands, pedals and fume extraction equipment are not listed as included. Confirm the complete accessory configuration before ordering.
Control Unit vs. Complete Station
| Buying consideration | NAE-1C Control Unit | Complete Nano Station Package |
|---|---|---|
| Core purpose | Power and control for separately selected compatible tools | Bundled setup with contents defined by the exact package SKU |
| Handpieces | Not listed in this package | Verify included models and quantity |
| Cartridges and stands | Select and verify separately | Verify the package list rather than assuming inclusion |
| Best selection approach | Match an existing setup or configure the tools you need | Compare total contents against your workflow |
JBC lists NAE-9C for 100V, NAE-1C for 120V and NAE-2C for 230V. These are separate voltage references; verify the equipment label and supply before connection.
Setup and Maintenance
- Verify the installation supply and exact 120V unit reference.
- Confirm each tool, cartridge and stand combination before purchase or connection.
- Use appropriate cartridge geometry and the lowest practical working temperature.
- Keep cartridge working surfaces clean and tinned; avoid excessive force and abrasive damage.
- Use Hibernation Mode and follow JBC instructions for safe tool storage and shutdown.
- Follow manufacturer instructions for grounding, firmware, PC software and pedal or extractor connections.
Frequently Asked Questions
Is NAE-1C a complete soldering station with tools?
No. JBC identifies it as a 2-Tool Nano Control Unit. Its product composition lists the control unit and instruction manual, not a complete tool package.
Can it operate two tools simultaneously?
Yes. JBC explicitly describes simultaneous operation of two compatible tools for soldering or desoldering processes.
Which tools are compatible?
JBC names the NT115 Nano Handle, NP115 Nano Tweezers and AN115 Adjustable Nano Tweezers. Select compatible cartridges and supporting accessories for the chosen tool.
What voltage does this model require?
NAE-1C is the 120V configuration. NAE-9C and NAE-2C are separate 100V and 230V references respectively.
Is 14W the total power for both tools?
JBC specifies peak power of 14W per tool. Do not treat that figure as a nominal station input-power rating.
What temperature range is available?
The selectable range is 90–450°C / 190–840°F, with listed temperature accuracy of ±3%.
What are the USB connections for?
USB-A supports firmware updates, graphics and profiles. USB-B provides PC communications using supported JBC software.
Are pedals and a fume extractor included?
They are not listed in the package contents. The unit provides one pedal connector per tool and an FAE / Robot connector for remote control or compatible FAE fume extractor connection.
