MG Chemicals 8241-T, Alcohol Wipes for Electronics, 75 Wipes/Tub, 6 in x 7 in Wipes
MG Chemicals 8241-T — IPA Alcohol Wipes for Electronics, 75 Wipes/Tub, 6" × 7", Case of 12 Tubs
MG Chemicals 8241-T (SKU: 8241-T) are pre-saturated isopropyl alcohol (IPA) wipes for electronics cleaning, packaged in a convenient pop-up dispensing tub. Each wipe is 6" × 7" — large enough for cleaning PCBs, soldering iron tips, workstation surfaces, and electronic components. The pop-up tub format provides one-handed dispensing and keeps wipes moist between uses. Supplied in cases of 12 tubs (75 wipes per tub, 900 wipes per case).
Key Specifications
| Specification | Value |
|---|---|
| Part Number / SKU | 8241-T |
| Saturation | Isopropyl alcohol (IPA) |
| Wipe Size | 6" × 7" |
| Wipes per Tub | 75 |
| Tubs per Case | 12 |
| Total Wipes per Case | 900 |
| Dispenser Format | Pop-up tub — one-handed dispensing |
| Application | PCB cleaning, flux removal, surface prep, component cleaning |
| Brand | MG Chemicals |
Key Features
- Pre-saturated IPA wipes — ready to use; no measuring, pouring, or separate saturating step required
- Pop-up tub dispenser — one-handed dispensing keeps the workflow moving; lid keeps wipes moist between uses
- 6" × 7" wipe size — large format for efficient cleaning of PCBs, assemblies, and workstation surfaces
- Electronics-safe IPA formula — isopropyl alcohol is the standard solvent for flux residue removal, contact cleaning, and surface preparation in electronics assembly
- Case of 12 tubs — high-volume packaging for production environments with multiple workstations
Frequently Asked Questions
What are MG Chemicals 8241-T wipes used for in electronics assembly?
The 8241-T wipes are used for a wide range of cleaning tasks in electronics assembly including: removing flux residue from PCBs after soldering, cleaning soldering iron tips and holders, wiping down workstation surfaces and ESD mats, cleaning component leads before soldering, removing fingerprints and oils from PCBs and housings, and general surface preparation before conformal coating or adhesive bonding.
What IPA concentration are the 8241-T wipes saturated with?
Refer to the MG Chemicals TDS for the specific IPA concentration. MG Chemicals electronics wipes are formulated for electronics cleaning applications. For applications requiring a specific IPA concentration (e.g., 70% for disinfection or 99% for moisture-sensitive components), verify the concentration in the TDS before use. Contact MTE Solutions for the current TDS.
How do I keep the wipes from drying out?
Always replace the tub lid firmly after dispensing a wipe. Store tubs upright in a cool location away from direct sunlight and heat sources. If wipes begin to dry out, the tub can be refreshed by adding a small amount of IPA — however, for best results use wipes within the recommended shelf life and keep the lid closed between uses.
Are the 8241-T wipes safe for use on PCBs with conformal coating?
IPA is generally safe for use on most conformal coatings for surface cleaning, but aggressive wiping or prolonged contact may affect some coating types — particularly acrylic coatings. For cleaning coated assemblies, use light wiping pressure and verify compatibility with your specific coating before use. For flux removal prior to conformal coating application, use before coating is applied.
