Teknipure TM-RMCI06Z-815MD, Mop Cover Replacement, Case of 150
Teknipure TM-RMCI06Z-815MD TekniMop Microdenier Mop Cover Replacement, Presaturated 6% IPA, 8 x 15 in, Case of 150
The Teknipure TM-RMCI06Z-815MD is a presaturated microdenier polyester mop cover replacement for TekniMop systems, 8" x 15", presaturated with 6% isopropyl alcohol (IPA), rated for ISO Class 5–7 environments. The microdenier polyester construction provides ultra-fine filament contact with the floor surface for superior particle capture and retention compared to standard microfiber — microdenier fibers are finer than standard microfiber, increasing the number of filaments in contact with the surface per pass and improving pickup of sub-micron particles. The presaturated format delivers a consistent, factory-validated 6% IPA concentration to every mop cover in the case, eliminating the variability of manual saturation. The 6% IPA concentration is a low-alcohol formulation used for routine surface maintenance cleaning in pharmaceutical and biotech cleanrooms where 70% IPA is reserved for disinfection cycles. Laundered and packaged in ISO Class 4 (Class 10) cleanroom conditions. 25 covers per bag, 6 bags per case = 150 covers/case.
Sold in cases of 150 mop covers (25/bag, 6 bags/case).
Specifications
| SKU | TM-RMCI06Z-815MD |
|---|---|
| Brand | Teknipure |
| Product Line | TekniMop® MicroMop Replacement Covers |
| Cover Material | Microdenier polyester |
| Cover Size | 8 in x 15 in |
| Saturation Solution | 6% isopropyl alcohol (IPA) |
| Condition | Presaturated |
| Cleanroom Rating | ISO Class 5–7 (Class 100–10,000) |
| Laundering/Packaging Environment | ISO Class 4 (Class 10) cleanroom |
| Packaging | 25/bag, 6 bags/case, 150 covers/case |
| Compatible Hardware | TekniMop® mop systems |
| Application | Routine floor and wall maintenance cleaning in ISO Class 5–7 pharmaceutical, biotech, and semiconductor cleanrooms |
Frequently Asked Questions
What is the advantage of microdenier polyester over standard microfiber for cleanroom mop covers?
Microdenier fibers are finer than standard microfiber filaments, increasing the number of fiber contact points per unit area of floor surface. This higher filament density improves pickup and retention of sub-micron particles — critical in ISO Class 5–7 environments where particle counts are tightly controlled. Microdenier polyester also provides lower NVR and extractables than standard microfiber, reducing the risk of residue deposition on cleaned surfaces.
Why is 6% IPA used for presaturation rather than 70% IPA?
6% IPA is a low-concentration formulation used for routine surface maintenance cleaning between disinfection cycles in pharmaceutical and biotech cleanrooms. 70% IPA is the standard concentration for broad-spectrum disinfection; 6% IPA is used where a lower alcohol concentration is specified by SOP for routine maintenance passes. Always follow your facility’s validated cleaning and disinfection SOP to determine the correct IPA concentration for each application step.
How many mop covers should I stock per cleaning cycle?
The number of covers required depends on floor area, ISO class, and cleaning protocol. A general guideline for ISO Class 5–7 environments is to change mop covers every 20–30 square meters to prevent cross-contamination from a saturated or contaminated cover. With 150 covers per case (25/bag), the TM-RMCI06Z-815MD case format supports high-volume cleanroom operations and regular cover rotation schedules. The individual bag format (25/bag) allows partial case use while keeping unused covers sealed and protected.
Is a dry version or a 70% IPA presaturated version of this mop cover available?
Contact MTE Solutions for availability of TekniMop microdenier mop covers in dry format or with alternative IPA concentrations for your specific cleaning protocol requirements.
