SCS 8214, Table Mat Kit, 3-Layer Vinyl, 8200 Series, Blue, 24 in x 48 in x 0.140 in
SCS 8214, Table Mat Kit, 3-Layer Vinyl, 8200 Series, Blue, 24 in x 48 in x 0.140 in
The SCS 8214 is a ready-to-use ESD workstation mat kit in the 8200 Series — a 24″ × 48″ pre-cut 3-layer vinyl mat in blue, packaged with all the grounding hardware needed to set up a compliant ESD-protected workstation right out of the box. No roll cutting, no separate hardware sourcing required. It’s the fastest path to a verified, grounded worksurface for electronics assembly, inspection, or rework.
What’s Included
- 1 × SCS 8200 Series 3-layer vinyl ESD mat, 24″ × 48″ × 0.140″, Blue
- 1 × Common point ground cord
- 1 × 10mm female snap installed in mat
Specifications
| Spec | Value |
|---|---|
| SKU | 8214 |
| Series | SCS 8200 |
| Material | 3-layer vinyl |
| Top Layer | Static dissipative |
| Middle Layer | Conductive |
| Bottom Layer | Conductive |
| Mat Size | 24″ × 48″ × 0.140″ |
| Color | Blue |
| Compliance | ANSI/ESD S20.20, ANSI/ESD STM4.1 |
| Kit Contents | Mat + common point ground cord + 10mm snap |
| Stock Location | Canton, MA |
Key Features
- 3-Layer Vinyl Construction: Dissipative top layer for safe component contact; conductive middle and bottom layers for reliable grounding path.
- Ready-to-Use Kit: Includes grounding cord and snap — everything needed to set up a compliant ESD workstation immediately.
- Pre-Cut to Standard Size: 24″ × 48″ fits standard single-operator workbenches without cutting or trimming.
- ANSI/ESD S20.20 Compliant: Meets worksurface requirements for ESD-protected areas.
- Economical Entry Point: Vinyl construction offers a cost-effective solution for lower-traffic workstations and inspection areas.
Frequently Asked Questions
What is included in the SCS 8214 mat kit?
The 8214 kit includes a pre-cut 24″ × 48″ 3-layer vinyl ESD mat in blue, a common point ground cord, and a 10mm female snap pre-installed in the mat. Everything needed to set up a grounded ESD workstation is included — no additional hardware required.
How does the SCS 8214 vinyl mat compare to the SCS R3 rubber mat?
The 8214 uses 3-layer vinyl construction, which is a cost-effective choice for lower-traffic workstations, inspection areas, and light assembly. The R3 rubber mat (e.g., SCS 770074 kit) uses high-strength nitrile rubber that is non-humidity-dependent, solvent-resistant, and rated for soldering applications. For active soldering, rework, or high-compliance EPAs, the R3 rubber mat is the stronger choice. For general inspection and light assembly, the 8214 vinyl kit is a practical, economical option.
Does the SCS 8214 comply with ANSI/ESD S20.20?
Yes. The 8200 Series mat meets ANSI/ESD S20.20 worksurface requirements and is tested per ANSI/ESD STM4.1. The 3-layer construction provides a dissipative top surface and conductive grounding path suitable for ESD-protected area compliance.
Can I use the SCS 8214 with a continuous workstation monitor?
The 8214 includes a common point ground cord and 10mm snap for standard grounding. Compatibility with continuous workstation monitors depends on the monitor’s mat resistance measurement range — verify against your monitor’s specifications. For guaranteed monitor compatibility, the SCS 770074 R3 rubber mat kit is the recommended choice.
What size workbench does the SCS 8214 fit?
The 24″ × 48″ pre-cut size fits standard single-operator electronics workbenches. For wider benches or custom sizes, the SCS 8200 Series is also available in roll form for cutting to size.
