Transforming Technologies MT4536GY Two-Layer Rubber ESD Table Mat Roll, Gray, 36 in x 50 ft x 0.080 in
Transforming Technologies MT4536GY Two-Layer Rubber ESD Table Mat Roll
The Transforming Technologies MT4536GY is a gray two-layer rubber ESD table mat roll measuring 36 inches wide by 50 feet long and 0.080 inch thick. Its static-dissipative top layer and conductive bottom layer provide a controlled path for static charge to move safely to ground while protecting the work surface from normal manufacturing wear.
Key Features
- Part number MT4536GY
- Gray two-layer rubber ESD table mat
- 36 in x 50 ft roll
- 0.080 in thickness
- Static-dissipative colored top layer with conductive black bottom layer
- NBR rubber construction
- Smooth surface for electronics assembly and inspection work
- Resistance below 1.0 x 109 ohms
- Approximate charge decay time: 0.01 second
- Resistant to hot solder, soldering irons, most solvents, and everyday wear
- Available in the MT4500 series in multiple colors and widths
How the Two-Layer ESD Mat Works
The static-dissipative top layer safely absorbs charge from items placed on the mat and controls the rate of discharge. The conductive bottom layer provides a lower-resistance path so the charge can flow to a properly connected ground point. Use the mat as part of a complete ESD control program and ground it according to your facility’s procedures.
Applications
Use the MT4536GY at electronics assembly, soldering, repair, inspection, laboratory, and ESD-protected workstations. The durable rubber surface helps protect both sensitive components and the underlying bench from cutting, scraping, hot solder, soldering tools, solvents, and general manufacturing wear.
Specifications
| Specification | Detail |
|---|---|
| Part number | MT4536GY |
| Series | MT4500 |
| Color | Gray |
| Size | 36 in x 50 ft |
| Thickness | 0.080 in |
| Material | NBR rubber |
| Surface | Smooth |
| Construction | Two-layer rubber, dissipative top and conductive bottom |
| Resistance | 8 x 106 to 108 ohms |
| Charge decay | Approximately 0.01 second |
| ESD standards | ANSI/ESD S20.20 and ANSI/ESD STM4.1 |
Frequently Asked Questions
What size is the MT4536GY mat roll?
The gray MT4536GY roll is 36 inches wide, 50 feet long, and 0.080 inch thick.
What is the difference between the two layers?
The colored top layer is static dissipative and controls the rate of charge release. The black bottom layer is conductive and provides the lower-resistance path toward ground.
Does this mat need to be grounded?
Yes. An ESD mat must be connected to an appropriate ground point and used as part of a complete ESD control program. Follow your facility’s grounding and verification procedures.
Can this mat be used at a soldering workstation?
Yes. The product information identifies resistance to hot solder, soldering irons, most solvents, and normal wear, making it suitable for electronics assembly and soldering workstations.
What material is the mat made from?
The MT4536GY is made from NBR rubber.
Is this a pre-cut mat or a roll?
This listing is for a continuous 36-inch by 50-foot roll.
