Desco 19282 Wrist Strap And Footwear Combo Tester With Stand
Desco 19282 Wrist Strap and Footwear Combo Tester with Stand
The Desco 19282 is a combination wrist strap and footwear ESD tester with an integrated stand — a single-station solution for verifying that operators are properly grounded before entering an ESD-protected area (EPA). It tests both wrist straps and foot grounders in one compact unit, providing a pass/fail indication that meets ANSI/ESD S20.20 personnel grounding verification requirements. The included stand keeps the tester at a convenient height for use at EPA entry points without requiring a dedicated surface.
Specifications
| Spec | Value |
|---|---|
| SKU | 19282 |
| Brand | Desco |
| Test Functions | Wrist strap + footwear (combo) |
| Display | Pass/Fail LED indication |
| Stand | Included |
| Wrist Strap Test Range | 750 kΩ to 35 MΩ (with 1 MΩ resistor) |
| Footwear Test Range | 750 kΩ to 35 MΩ (per foot) |
| Compliance | ANSI/ESD S20.20, ANSI/ESD STM97.1 |
| Power | AC adapter (included) |
| Stock Location | Canton, MA |
Key Features
- Combo Testing — One Station: Tests both wrist straps and footwear in a single unit, reducing the number of testers needed at EPA entry points.
- Integrated Stand: Keeps the tester at operator height for convenient use at EPA entry points — no bench or surface required.
- Pass/Fail LED Indication: Clear, unambiguous pass/fail display — no interpretation required by the operator.
- ANSI/ESD S20.20 Compliant: Test ranges meet ANSI/ESD S20.20 personnel grounding verification requirements and ANSI/ESD STM97.1.
- Wrist Strap + Footwear in One Test Cycle: Operators can verify full grounding compliance in seconds before entering the EPA.
- Desco Quality: Desco is a leading manufacturer of ESD control products with decades of experience in personnel grounding verification equipment.
Frequently Asked Questions
What is the difference between the Desco 19282 and the Desco 19280?
Both are Desco combo wrist strap and footwear testers with the same test functions and pass/fail LED indication. The 19282 includes an integrated stand for floor or counter use at EPA entry points. The 19280 does not include a stand and is designed for bench-top or surface-mounted use. Choose the 19282 if you need a self-contained, freestanding tester at your EPA entry point.
Does the Desco 19282 test both feet simultaneously?
Yes. The 19282 tests both foot grounders simultaneously — one foot plate per foot — providing a combined pass/fail result for the operator's full footwear grounding system in a single test cycle.
Is the Desco 19282 compliant with ANSI/ESD S20.20?
Yes. The 19282 test ranges (750 kΩ to 35 MΩ for wrist straps and footwear) meet ANSI/ESD S20.20 personnel grounding verification requirements and are tested per ANSI/ESD STM97.1.
Can the Desco 19282 log test results?
The 19282 provides pass/fail LED indication only and does not include built-in data logging. For facilities requiring test result logging and audit trail documentation, consider the Desco 19271 Combo Tester X3 with Stand, which includes advanced logging capabilities.
What wrist strap connector types does the Desco 19282 support?
The 19282 supports standard 4mm snap wrist strap connectors — the most common connector type used with Desco and most other ESD wrist straps. Verify your wrist strap connector type before ordering if you use non-standard connectors.
