MG Chemicals 8310A-55ML, Conformal Coating Stripper Gel, 1.9 oz. Bottle, Case of 5 Bottles
MG Chemicals 8310A-55ML — Conformal Coating Stripper Gel, 1.9oz Bottle, Case of 5
MG Chemicals 8310A-55ML is a brush-on gel conformal coating stripper designed to remove acrylic, epoxy, silicone, and urethane conformal coatings from PCBs and electronic assemblies. The gel formula clings to vertical and overhead surfaces, allowing extended dwell time for effective coating removal without running. Sold in 1.9oz (55ml) bottles, case of 5.
Key Specifications
- Part Number: 8310A-55ML
- Size: 1.9oz (55ml) bottle
- Quantity: Case of 5 bottles
- Format: Brush-on gel
- Removes: Acrylic, epoxy, silicone, urethane conformal coatings
- Application: Brush-on, spot removal
Applications
- Spot removal of conformal coating for PCB rework and repair
- Removing acrylic coatings (MG Chemicals 419B, 419C, 419D series)
- Removing silicone coatings (MG Chemicals 422B series)
- Removing epoxy and urethane conformal coatings
- Bench-top rework stations requiring precise, localized coating removal
Frequently Asked Questions
What conformal coatings does MG Chemicals 8310A remove?
The 8310A is formulated to remove acrylic, epoxy, silicone, and urethane conformal coatings. It is compatible with MG Chemicals 419 series acrylic and 422B silicone coatings, as well as many other brands. Verify compatibility with your specific coating before use.
Why is the 8310A a gel rather than a liquid?
The gel formula is designed to cling to the coating surface and resist running, allowing extended dwell time for effective penetration and removal. This is especially useful for spot rework on populated PCBs where controlling the stripper to a specific area is important.
How do I use MG Chemicals 8310A stripper gel?
Apply the gel to the coated area using a brush, allow it to dwell for the recommended time per the technical datasheet, then remove the softened coating with a swab, brush, or rinse. Repeat as needed for thick or cured coatings.
What is the difference between the 8310A-55ML and the 8310A-850ML?
Both are the same 8310A gel formula. The 55ML bottle (case of 5) is suited for bench-top spot rework. The 850ML can (case of 2) is better for higher-volume removal operations. Choose based on your usage volume and application method.
Is MG Chemicals 8310A safe to use on PCB substrates and components?
The 8310A is designed for use on PCBs, but care should be taken around sensitive components, plastics, and labels. Always test on a non-critical area first and consult the MG Chemicals 8310A safety data sheet for full handling and safety information.
