Botron B131012, 10 in X 12 in Clear Shield-It Flat Metal-In ESD Bags
Botron B131012, 10 in X 12 in Clear Shield-It Flat Metal-In ESD Bags
Botron B131012 Clear Silver Shield-It Metal In 3mil Flat Bag 10”x1′ Pack of 100
Metal-In Shielding Bags
Botron’s Metal-In Flat and Zip Shielding Bags are made from a layered, metalized polyester with static dissipative inner and outer layers. The polyester dielectric and metal layer create a Faraday effect for shielding of ESD. ESD sensitive materials stored inside the bag are provided a static safe environment.
Overview
The metal-in formulation of Botron Anti-static Shielding Bags protects components from EMI interference and ESD risk that metal-out bags can. Metal-in construction fully isolates its contents inside preventing risk of contact with charged conductors or unintended paths to ground.
The inner and outer film of Botron’s Anti-static Shielding Bags is low tribocharging, charges that can occur during handling are drastically reduced. Additionally, the anti-static film is low capacitance, meaning not only will it not hold a large charge, any charge buildup will be quickly dissipated.
Built Tough
Reliable burst, puncture, pull and tear strength.
Layer by Layer
5-Layer formulated to maximized ESD protection.
TGIF
Thank goodness it’s Faraday! The Faraday effect a metal-in bag provides shields not only electrostatic fields, but EMI as well.
Be Aware
Bright yellow classic ESD awareness logomark.
Technical Information
Material
- Outer Layer - Polyester
- Inner Layer - Polyethylene
- Shielding Layer - Aluminum
Surface Resistivity
- Outer Layer - <1011
- Inner Layer - <102
- Shielding Layer - <1011
Static Shielding
Charge Generation
- Teflon - 0.09 nC/sq. in.
- Quartz - 0.01 nC/sq. in.
Capacitance Probe
to dissipate 1 KV
Thickness
Interior Dimensions
Light Transmission
Burst Strength
Heat Seal
Seam Strength
Tear Strength
Puncture Resistance
MVTR
Moisture vapor transmission rate
OTR
Oxygen transmission rate