Aven Tools 10326, Tapered Head Cutter, Flush Cut
Aven Tools 10326, Tapered Head Cutter, Flush Cut
Aven Tools 10326 is a 114 mm (4.5-inch) tapered-head flush cutter rated for 0.15–1.25 mm soft copper wire. Its pointed head improves cutting access in confined work areas, while box-joint construction maintains jaw alignment. Mirror-finished 410 stainless steel, induction-hardened cutting edges and cushioned ESD-safe grips make it a practical choice for repetitive electronics-bench wire trimming within its specified capacity.
Best Uses / Applications
- Trimming soft copper wire from 0.15 to 1.25 mm diameter in electronics assembly and repair.
- Reaching wire-cutting locations where the tapered, pointed head provides useful access.
- Repetitive bench work where spring-assisted reopening and cushioned grips are helpful.
- ESD-controlled electronics workstations using facility-qualified tools and handling procedures.
Key Features
- Tapered head with flush cutting edges and 13.95 mm blade length.
- Induction-hardened edges rated at 50–52 HRC.
- Box-joint construction for durability and jaw alignment.
- Dual leaf springs assist comfortable opening and closing.
- Mirror-finished 410 stainless steel; Aven describes improved rust protection compared with standard carbon-steel pliers.
- Cushioned, manufacturer-designated ESD-safe grips.
Technical Specifications
| Specification | Aven 10326 |
|---|---|
| Manufacturer / part number | Aven Tools / 10326 |
| Head style | Tapered |
| Cutting edge | Flush, induction hardened |
| Edge hardness | 50–52 HRC |
| Cutting capacity | 0.15–1.25 mm soft copper wire |
| Blade length | 13.95 mm |
| Head width | 11.85 mm |
| Overall length | 114 mm; nominal 4.5 in |
| Material / finish | 410 stainless steel / mirror finish |
| Joint / springs | Box joint / dual leaf springs |
| Grips | Cushioned, manufacturer-designated ESD safe |
| Manufacturer-listed weight | 0.25 lb; not a verified packed shipping weight |
| Numeric ESD resistivity | Aven's web entry contains ambiguous notation and units. Confirm the numeric rating with Aven before using it as a qualification limit. |
Aven 10326 vs. 10325: Flush or Semi-Flush?
| Selection point | 10326 | 10325 |
|---|---|---|
| Head profile | Tapered | Tapered |
| Cutting edge | Flush | Semi-flush |
| Soft copper wire capacity | 0.15–1.25 mm | 0.2–1.25 mm |
| Blade length / head width | 13.95 mm / 11.85 mm | 13.95 mm / 11.85 mm |
| Overall length | 114 mm | 114 mm |
| Selection guidance | Choose when a flush edge and the stated fine-wire range suit the application. | Choose when a semi-flush edge suits the required cut. |
Do not extend either model's soft-copper capacity to steel, hardened wire or other materials without manufacturer confirmation. The tapered profile improves access, not the stated cutting capacity.
Manufacturer ESD Documentation
Download Aven's Technik Cutters ESD Certification Statement (PDF). Aven's February 10, 2025 declaration explicitly includes model 10326 and states compliance with IEC 61340-5-1 and ANSI/ESD S20.20. This is a manufacturer declaration, not an independent test report. Request detailed test reports from Aven and qualify the tool within your facility's ESD-control program.
Aven Manufacturer Video
Aven provides this Technik tools video on its 10326 product page. It is a family presentation, not a model-specific capacity or qualification test.
Watch the Aven manufacturer video on YouTube.
Frequently Asked Questions
What wire can Aven 10326 cut?
Aven specifies 0.15–1.25 mm soft copper wire. Do not assume suitability for steel, hardened wire or other materials outside that rating.
Is 10326 flush or semi-flush?
The 10326 has a flush cutting edge. The similar tapered-head 10325 is semi-flush and has a 0.2–1.25 mm soft-copper capacity.
Why choose a tapered head?
The pointed profile improves access to the cutting location. Use the tool within its stated capacity; access advantages do not increase cutting strength or the approved wire range.
What are the length and blade dimensions?
Overall length is 114 mm, nominally 4.5 inches. Blade length is 13.95 mm and head width is 11.85 mm.
Does Aven's ESD declaration cover this model?
Yes. Model 10326 is explicitly listed in Aven's February 10, 2025 Technik Cutters declaration. Ask Aven for detailed test reports if your facility requires measured qualification data.
What is the numeric grip resistivity?
The manufacturer's current web entry has ambiguous notation and units, so we do not present it as a verified numeric rating. Obtain clarification from Aven before using a numerical limit for qualification.
Are ESD-safe grips electrically insulating?
The ESD-safe designation does not establish an electrical-insulation rating. Do not treat these grips as protection for energized electrical work.
What supports repetitive cutting?
Dual leaf springs assist reopening, cushioned grips improve handling comfort, and the box joint supports jaw alignment. Select a tool and work method appropriate to the task and wire size.
Related Tools & Resources
Browse our Aven Tools collection and cutters collection. For electronics-bench tool selection, visit our PCB Rework & Precision Tools guide.
Manufacturer Warning
California Warning: This product can expose you to chemicals including Diisononyl Phthalate (DINP), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
