ACL Staticide DMP2448DG Dark Gray 24" x 48" Dualmat Kit
ACL Staticide DMP2448DG Dark Gray 24" x 48" Dualmat Kit
This is an MTE Solutions-assembled workstation bundle built around the ACL Staticide DMP2448DG dark-gray DualMat, sized 24" x 48". It brings together the mat and the accessory SKUs listed below for a static-control bench setup. ACL manufactures the DualMat; MTE assembles this combo. Confirm the included components against your work-area requirements before ordering.
Best Uses / Applications
- Electronics assembly and repair benches needing a 24" x 48" static-control work surface.
- Inspection or test workstations where a mat, grounding cord, and wrist strap set are required together.
- Refreshing an ESD workstation with cleaning and personnel-grounding supplies alongside a new mat.
MTE Bundle Contents
- DMP2448DG: dark-gray ACL DualMat, 24" x 48" x 0.08".
- 8090: ground cord.
- 6001S: mat cleaner.
- 7001S: hand lotion.
- 8150: wrist strap and cord combo.
- LF50S: wipe sample.
ACL DualMat Specifications
| Mat color and size | Dark gray; 24" x 48" |
|---|---|
| Mat thickness | 0.08" |
| Construction | Static-dissipative top layer with conductive bottom layer |
| Finish | Embossed |
| Mat connections | Two 10 mm female snaps on pre-cut mat, per ACL DualMat information |
| Top layer | ACL lists 10^6–10^8 ohms |
| Bottom layer | ACL lists less than 5 x 10^5 ohms |
These are mat specifications, not a certification of the assembled workstation. Install and test the complete ground path and personnel grounding against your ESD program's procedures.
Frequently Asked Questions
Is this an ACL factory kit?
No. MTE Solutions assembles the bundle using the ACL DualMat and the accessory SKUs listed here.
What size is the mat?
The DMP2448DG mat is dark gray and measures 24" x 48" x 0.08".
Is a ground cord included?
Yes. The listed MTE bundle includes an 8090 ground cord.
Does the bundle include a wrist strap?
Yes. It lists the 8150 wrist strap and cord combo.
Does this kit automatically make my station compliant?
No. Grounding, installation, testing, and documentation are still needed under your ESD-control program.
