Aven Tools 10179 Ratcheting Wire Ferrule Crimping Tool, 6–10 AWG
Aven Tools 10179 Ratcheting Wire Ferrule Crimping Tool, 6–10 AWG
The Aven Tools 10179 is a ratcheting crimping tool supplied with a die for large insulated wire ferrules in 10, 8 and 6 AWG sizes. Its full-cycle ratchet supports consistent crimping action, while adjustable crimp force and a quick-release mechanism give the operator control during setup and use. Alloy-steel construction and replaceable dies make it a practical tool for repeated ferrule preparation.
At a wiring bench, select the correct die slot for the ferrule and conductor, position the ferrule and squeeze through the complete crimp cycle until the handle releases automatically. If a crimp is incorrectly positioned, the release mechanism allows the cycle to be interrupted. Rubberized grips provide a comfortable hand-contact surface during repeated work.
Best Uses / Applications
- Control-panel wiring: Prepare compatible insulated wire ferrules for conductor termination.
- Electrical assembly: Crimp the specified 10, 8 and 6 AWG ferrule sizes during bench wiring work.
- Maintenance and repair: Replace or prepare ferrule terminations where the conductor, ferrule and terminal requirements match.
- Production wiring: Use a full-cycle ratchet for repeatable manual crimping operations.
- Professional and workshop projects: Prepare larger ferrule sizes with the supplied interchangeable die.
Key Features
- Included die for large insulated wire ferrules in 10, 8 and 6 AWG sizes.
- Smooth ratcheting mechanism with automatic handle release after a complete cycle.
- Release mechanism allows interruption of an incorrectly positioned crimp.
- Adjustable crimping force.
- Tool-free die replacement: dies slide into and out of the frame by hand.
- Alloy-steel tool and dies; manufacturer describes hardened, precisely milled dies.
- Rubberized grips for comfortable handling.
Technical Specifications
| Manufacturer | Aven Tools |
|---|---|
| Part number / SKU | 10179 |
| Tool type | Ratcheting wire ferrule crimper |
| Included application | Large insulated wire ferrules |
| Included AWG sizes | 10 / 8 / 6 AWG |
| Manufacturer-listed metric sizes | 6 / 10 / 16 mm² |
| Jaw type | F |
| Construction | Alloy-steel tool and dies |
| Grip | Rubberized |
| Crimp-force adjustment | Adjustable |
| Die changes | Tool-free, interchangeable |
| Listed product weight | 0.75 lb, per manufacturer specifications |
AWG and metric sizes are presented as the manufacturer's listed die applications, not exact mathematical conversions. Match the conductor, ferrule and die slot to the applicable termination requirements. Rubberized grips are not evidence of an electrical-insulation rating; this listing does not establish suitability for live electrical work.
Crimper Selection Comparison
| Option | Selection Guidance |
|---|---|
| Aven 10179 with included F die | For the listed large insulated wire ferrules in 10, 8 and 6 AWG sizes. |
| Same tool with another compatible die | May extend the tool's applications; confirm the exact replacement die, ferrule type and supported sizes before ordering. |
| Small-gauge ferrule crimper | Select a tool and die expressly covering smaller conductors; do not assume coverage from this tool's 6–10 AWG designation. |
| Terminal or connector crimper | Choose the die and tool specified for that terminal or connector; ferrule compatibility does not establish universal terminal compatibility. |
Frequently Asked Questions
Which sizes does the included die crimp?
The supplied die is identified for large insulated wire ferrules in 10, 8 and 6 AWG sizes. The manufacturer also lists metric sizes of 6, 10 and 16 mm².
Is the die included?
Yes. The manufacturer describes an included die for the listed ferrule sizes and identifies jaw type F.
How does the ratchet release?
During normal operation, squeeze through the complete cycle until the handle releases automatically. A separate release mechanism allows an incorrectly positioned crimp to be interrupted.
Can crimping force be adjusted?
Yes. The tool includes crimp-force adjustment. Follow the manufacturer instructions and validate the completed termination against your process requirements.
Do I need tools to change dies?
No. The manufacturer describes dies that slide into and out of the frame by hand and snap into place without tools.
Can I use it for every terminal or ferrule size?
No. The included die covers the listed ferrule applications. Other sizes or connector types require a specifically compatible die and tool combination.
Are the handles electrically insulated?
The grips are described as rubberized for comfort. No electrical-insulation rating is established by the supplied specifications.
What is it made from?
The tool and dies are made from alloy steel; the manufacturer describes hardened, precisely milled dies.
Related Resources
Explore the Aven Tools collection and PCB Rework & Precision Tools resource hub for related assembly and bench-tool resources.
