3M 7100007737 3M™ Polyimide Film Tape 5413, Amber, 2.7 Mil, 1 In x 36 Yd, 9/Case, Boxed

3M SKU: 7100007737
Size
Color
Price
Regular price $10257
Regular price Sale price $10257
/
Minimum quantity allowed is .
Maximum quantity allowed is .
The product can be bought in quantity increments of .
Shipping calculated at checkout.

3M 7100007737 3M™ Polyimide Film Tape 5413, Amber, 2.7 Mil, 1 In x 36 Yd, 9/Case, Boxed

3M™ Polyimide Film Tape 5413, product number 7100007737, combines DuPont™ Kapton® polyimide film with silicone adhesive for PCB solder masking and other high-temperature applications. The amber tape is 2.7 mil thick and provides dimensional stability at elevated temperatures while helping reduce adhesive transfer during removal. This listing is for the boxed configuration of nine rolls per case, each 1 inch wide by 36 yards long.

Best Uses / Applications

  • Protecting printed circuit board gold fingers during wave soldering or solder-dip processes.
  • Providing a release surface when fabricating parts cured at elevated temperatures.
  • High-temperature masking processes requiring a dimensionally stable polyimide film backing.
  • Electronics manufacturing operations evaluating silicone adhesive tape for reduced adhesive transfer and cleanup.

Evaluate the tape with your actual substrate, exposure time, temperature and removal process before production. Typical material properties do not establish suitability for every soldering profile or chemical exposure.

Key Features

  • DuPont™ Kapton® polyimide film backing does not soften at elevated temperatures.
  • Silicone adhesive supports high-temperature performance and helps reduce adhesive transfer.
  • Dimensional stability helps reduce rework.
  • Flame-retardant, chemical- and radiation-resistant construction as described in the technical sheet.
  • Polyethylene tape core rather than cardboard.
  • Amber color and 2.7 mil total thickness.

Technical Specifications

Performance values below are representative or typical values from 3M's July 2021 technical sheet, not specification limits. Final product specifications and test results are addressed by the applicable Certificate of Analysis.

Property Value
Manufacturer / series 3M / 5413
Product number / SKU 7100007737
Listed roll size 1 inch × 36 yards
Listed packaging 9 rolls per case, boxed
Backing DuPont™ Kapton® polyimide film
Adhesive Silicone
Color Amber
Backing thickness 1.0 mil; TDS metric value 0.03 mm
Total tape thickness, without liner 2.7 mil / approximately 69 microns (0.069 mm); TDS rounds to 0.07 mm
Standard roll length in TDS 33 m / 36 yd
Adhesion to steel 22 oz/in width / 24 N per 100 mm; ASTM D3330
Tensile strength at break 33 lb/in width / 578 N per 100 mm; ASTM D3579
Elongation at break 62%; ASTM D3579
Temperature use range −73 to 260°C / −100 to 500°F; typical TDS range, not a guaranteed dwell-time rating
Dielectric strength 7,000 volts; ASTM D149 typical test value, not a working-voltage rating
Outgassing TLM 1.50%; CVCM 0.50%; no application-specific acceptance inferred
Flame retardancy TDS reports Pass per UL 510, product category OARC2, file E124809
Shelf life 36 months from manufacture in original cartons at 21°C / 70°F and 50% relative humidity

Selection Comparison

Requirement 5413 selection guidance
PCB gold-finger solder masking Explicitly identified as an application in the 3M technical sheet.
Release surface for elevated-temperature curing Explicitly identified as an application; evaluate the actual cure process.
Permanent structural bonding The reviewed TDS does not establish structural-bonding performance; select a product rated for the joint.
Electrical insulation at a specified working voltage The 7,000 V test value is not a working-voltage approval; confirm application requirements with 3M.
Guaranteed residue-free removal 3M describes reduced adhesive transfer, not an unconditional residue-free guarantee.

Process and Storage Guidance

Test adhesion, masking protection and removal on representative parts under the intended process conditions. Do not treat the upper temperature figure as an unlimited exposure allowance. Retain lot identification and request the applicable Certificate of Analysis when production specifications require it. Store in original cartons at the stated temperature and humidity; shelf life runs from manufacture, not delivery. Consult the applicable Safety Data Sheet before use.

The existing product information describes this tape as halogen free using IEC 61249-2-21 limits of 900 ppm maximum chlorine, 900 ppm maximum bromine and 1,500 ppm maximum total halogens. The reviewed July 2021 TDS does not state this claim; obtain current manufacturer documentation if it is a purchasing requirement.

Frequently Asked Questions

What is included in product 7100007737?

This listing specifies nine boxed rolls per case, each 1 inch wide by 36 yards long. The case configuration is retained from the existing listing.

What is 3M 5413 used for?

3M identifies PCB gold-finger protection during wave soldering or solder dipping and release surfaces for parts cured at elevated temperatures.

What temperature range does the TDS list?

The typical range is −73 to 260°C (−100 to 500°F). Validate actual exposure time and process conditions; this is not an unlimited dwell-time guarantee.

Is 2.7 mil the film thickness or total thickness?

It is total tape thickness. The polyimide backing alone is listed at 1.0 mil in the TDS.

Does it leave no adhesive residue?

3M states that silicone adhesive performance helps reduce adhesive transfer. That does not guarantee residue-free removal on every substrate or after every process.

Does 7,000 V mean a 7,000 V working rating?

No. It is a typical dielectric-strength test result under ASTM D149, not an application-specific working-voltage rating.

How long can it be stored?

The TDS lists 36 months from manufacture when stored in original cartons at 21°C (70°F) and 50% relative humidity.

Can these typical values be used as acceptance specifications?

No. 3M states the TDS data are representative or typical and should not be used for specification purposes. Request the applicable Certificate of Analysis and confirm requirements with 3M.

Manufacturer Documentation

3M Polyimide Film Tape 5413 Technical Data Sheet, July 2021 (PDF).

Related Resources

Explore our Soldering, Desoldering & Rework guide, browse High Temp Tape, or shop the 3M collection.


You may also like...
More from 3M