Production Basics 1003 C-Leg Workstation 30"D x 36"W

Production Basics 1003 – C-Leg Workstation | 30"D x 36"W | 750 lb Capacity

The Production Basics 1003 is a heavy-duty C-Leg stand-alone workstation built from 12- and 14-gauge steel with an epoxy powder coat finish for scratch and impact resistance in demanding production environments. The open, modular design supports endless accessory configurations and seamless multi-station layouts. Worksurface height adjusts from 30" to 36" to accommodate seated or standing operators.

Sold individually.

Specifications

C-Leg Series Assembly Instructions (PDF)

Frequently Asked Questions

What does "C-Leg" mean and how does it differ from other workstation frame styles?
C-Leg refers to the C-shaped profile of the vertical frame members, which provides open access to the front and sides of the workstation without obstructing leg room or equipment placement. This is in contrast to A-frame or straight-leg designs. The C-Leg configuration is preferred in electronics assembly and production environments where operators need unobstructed access to the work surface from multiple angles.

Can the 1003 workstation be configured with ESD-safe accessories?
Yes. The Production Basics modular system supports a wide range of accessories including ESD-safe worksurfaces, overhead shelving, monitor arms, light bars, and bin rails. The open frame design and standardized rail system allow accessories to be added, repositioned, or removed without tools in most cases. Contact MTE Solutions for compatible ESD workstation accessories.

How is the worksurface height adjusted on the 1003?
The worksurface height adjusts between 30" and 36" via the C-Leg frame mounting positions. Refer to the assembly instructions (linked above) for the specific adjustment procedure. Height adjustment is typically performed during initial assembly or reconfiguration — it is not a quick-release mechanism for frequent height changes during use.

Can multiple 1003 workstations be connected to form a longer bench run?
Yes. The Production Basics modular design allows multiple stations to be joined side-by-side to create continuous bench runs for production lines or assembly areas. Additional connector hardware may be required. Contact MTE Solutions for multi-station configuration guidance and compatible joining accessories.