Aven Tools 10827F, Accu-Cut Mini Oval Head Cutter, Flush
Aven Tools 10827F, Accu-Cut Mini Oval Head Cutter, Flush
The Aven 10827F Accu-Cut Mini Oval Head Cutter provides flush cutting edges for fine soft-copper wire work in tight spaces. Its miniature oval head, forged-steel construction and ergonomic ESD-safe grips suit delicate electronics tasks, including SMT and work under a microscope. The manufacturer specifies a cutting range of 0.1–0.9 mm soft copper wire, listed as 38–20 AWG.
Best Uses / Applications
Consider the 10827F for fine wire trimming, delicate component work, SMT assembly and microscope-assisted bench tasks. The mini-oval head helps position the cutting edges in confined working areas, while the flush profile provides a clean, flatter trimmed end. Match the tool to the actual wire material and diameter rather than treating it as a general-purpose heavy-wire cutter.
Key Features
- Miniature oval head for fine cutting work in tight spaces.
- Flush cutting edges for precise, clean trimming.
- Forged steel with induction-hardened blades; Aven lists 63–65 HRC hardness.
- Ergonomic ESD-safe soft-plastic grips in yellow and black.
- Dual leaf springs for smooth operation.
- Screw-joint construction supports cutting-edge alignment.
- 125 mm overall length.
Technical Specifications
| Specification | Detail |
|---|---|
| Manufacturer / part number | Aven Tools / 10827F |
| Product family | Accu-Cut |
| Head style | Mini-oval |
| Cutting finish | Flush |
| Cutting capacity | 0.1–0.9 mm soft copper wire; manufacturer-listed 38–20 AWG |
| Cutter material | Forged steel, induction-hardened blades |
| Listed hardness | 63–65 HRC |
| Blade length, current manufacturer table | 8.7 mm ± 1 mm |
| Head width, current manufacturer table | 8.3 mm ± 1 mm |
| Total length | 125 mm |
| Handle material | ESD-safe soft plastic, yellow and black |
| ESD designation | ESD safe; manufacturer table lists 1010 Ω per square inch |
| Spring / joint | Dual leaf springs / screw joint |
| Manufacturer-listed weight | 0.25 lb |
| Manufacturer-listed shipping dimensions | 190 × 102 mm |
The shipping dimensions above describe packaging, not the cutter head. The ESD value is reproduced as labeled by Aven; use your facility's tool-qualification procedures when selecting equipment for an ESD-controlled area.
Fine-Wire Cutter Selection Comparison
| Selection factor | 10827F Accu-Cut Mini Oval | 10521 Niptec TR 25 |
|---|---|---|
| Cutting profile | Flush | Flush |
| Soft-copper capacity | 0.1–0.9 mm; Aven lists 38–20 AWG | Up to 18 AWG |
| Head design | Miniature oval head | Narrow cutting head |
| Application emphasis | Fine, delicate work including SMT and microscope-assisted tasks | Soft-copper trimming with narrow-head access into dense areas |
| Grips | ESD safe | ESD safe |
Select for access, wire diameter and material. A flush cutting profile alone does not establish the tool's capacity.
Use and Care
Stay within the published soft-copper cutting range. Do not assume a capacity for steel, hardened wire or other materials. Wear suitable eye protection, control clipped ends and inspect the edges before use. ESD-safe grips complement, rather than replace, your workstation's grounding and ESD-handling procedures.
Frequently Asked Questions
What wire can the Aven 10827F cut?
Aven specifies 0.1–0.9 mm soft copper wire and lists the range as 38–20 AWG. Check the actual wire diameter and material before use.
Is this a flush cutter?
Yes. The 10827F has flush cutting edges and a miniature oval head for fine cutting work.
Is it suitable for microscope or SMT work?
Aven specifically identifies SMT and microscopic work among its applications. Confirm that the head dimensions and cutting capacity suit your component layout.
What are the current blade and head dimensions?
Aven's current specification table lists an 8.7 mm ± 1 mm blade length and an 8.3 mm ± 1 mm head width. Overall tool length is 125 mm.
Are the grips ESD safe?
Yes. Aven identifies the ergonomic soft-plastic grips as ESD safe. Follow your facility's tool-qualification and ESD-control procedures.
Can it cut hardened wire?
The published rating is for soft copper wire. The 63–65 HRC hardness listing does not establish a hardened-wire cutting capacity; choose a tool explicitly rated for that material.
Related Resources
Explore the Aven Tools collection, compare options in the Cutters collection, and visit our PCB Rework & Precision Tools hub for related resources.
