Aven Tools 10325, Tapered Head Cutter, Semi-Flush, 4.5in
Aven Tools 10325, Tapered Head Cutter, Semi-Flush, 4.5in
Aven Tools 10325 is a tapered head semi-flush cutter rated for 0.2–1.25 mm soft copper wire. Aven describes the pointed head as providing increased cutting access while retaining sufficient strength when used within its capacity. The 114 mm, nominal 4.5-inch tool combines 13.95 mm blades, mirror-finished 410 stainless steel, and cushioned ESD-safe grips for electronics assembly and repair.
Best Uses / Applications
- Cutting soft copper wire from 0.2 to 1.25 mm diameter.
- Electronics assembly and repair where a tapered head suits restricted cutting access.
- Bench wire trimming where a semi-flush edge is appropriate.
- ESD-controlled workstations using facility-qualified tools and procedures.
Key Features
- Pointed tapered head designed for increased cutting access.
- Semi-flush cutting edges, induction hardened to 50–52 HRC.
- 13.95 mm cutting blade length.
- Mirror-finished 410 stainless steel; Aven specifies improved rust protection compared with standard carbon-steel pliers.
- Box-joint construction supports jaw alignment and durability.
- Dual leaf springs assist repeated opening and closing.
- Cushioned ESD-safe grips with a manufacturer ESD statement explicitly covering 10325.
Technical Specifications
| Specification | Aven 10325 |
|---|---|
| Manufacturer / part number | Aven Tools / 10325 |
| Head style | Tapered |
| Cutting edge | Semi-flush, induction hardened |
| Edge hardness | 50–52 HRC |
| Cutting capacity | 0.2–1.25 mm soft copper wire |
| Cutting blade length | 13.95 mm |
| Head width | 11.85 mm |
| Overall length | 114 mm; nominal 4.5 in |
| Material / finish | 410 stainless steel / mirror finish |
| Joint / springs | Box joint / dual leaf springs |
| Grips | Cushioned, manufacturer-designated ESD safe |
| Manufacturer-listed weight | 0.25 lb; not a confirmed packed shipping weight |
| Numeric ESD resistivity | The manufacturer's web entry has ambiguous notation and units. Confirm the numeric value with Aven before using it as a qualification limit. |
Aven 10325 vs. 10321: Tapered or Oval Head?
| Selection point | 10325 | 10321 |
|---|---|---|
| Head style | Tapered, pointed profile | Oval |
| Cutting edge | Semi-flush | Semi-flush |
| Soft copper capacity | 0.2–1.25 mm | 0.2–1.25 mm |
| Blade length | 13.95 mm | 14 mm |
| Head width | 11.85 mm | 11 mm |
| Overall length | 114 mm | 114 mm |
| Selection guidance | Choose where the pointed head profile improves access to the cut. | Choose where the oval head suits general-purpose wire cutting. |
The tapered profile does not increase the stated cutting capacity. Semi-flush is not a full-flush rating. Do not assume suitability for steel, hardened wire, or materials outside the specified soft-copper range.
Manufacturer ESD Documentation
Download Aven's Technik Cutters ESD Certification Statement (PDF). The February 10, 2025 manufacturer statement explicitly lists 10325 and states compliance with IEC 61340-5-1 and ANSI/ESD S20.20. This is a manufacturer declaration, not an independent test report; detailed test reports can be requested from Aven. Qualify the tool within your facility's ESD-control program.
Aven Manufacturer Video
This video is provided on Aven's 10325 product page.
Watch the Aven video on YouTube.
Frequently Asked Questions
What can Aven 10325 cut?
Aven rates it for 0.2–1.25 mm soft copper wire. Do not extend that rating to steel, hardened wire, or other materials without manufacturer confirmation.
Why choose a tapered head?
Aven describes the pointed head as improving cutting access while retaining sufficient strength within its stated capacity. Select it when that head profile fits the available space.
How does it differ from 10321?
Both are 114 mm semi-flush cutters rated for 0.2–1.25 mm soft copper. The 10325 has a tapered head, 13.95 mm blades, and an 11.85 mm head width; the oval-head 10321 has 14 mm blades and an 11 mm head width.
Does the ESD statement cover 10325?
Yes. Aven's February 10, 2025 Technik Cutters statement explicitly includes 10325 and declares compliance with IEC 61340-5-1 and ANSI/ESD S20.20. Obtain detailed test reports and apply your facility's qualification requirements as needed.
What is the numeric grip resistivity?
The current manufacturer web entry has ambiguous notation and units. We do not interpret it as a verified numeric rating. Ask Aven for clarification or a test report if qualification requires a specific limit.
Is this full flush or electrically insulated?
Aven specifies a semi-flush edge, not full flush. The ESD-safe grip designation does not establish an electrical-insulation rating; do not treat these grips as protection for energized electrical work.
Related Tools & Resources
Explore our Aven Tools collection and browse hand tools. For electronics-bench tool-selection context, visit our PCB Rework & Precision Tools guide.
Manufacturer Warning
California Warning: This product can expose you to chemicals including Diisononyl Phthalate (DINP), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
