JBC Tools PHNE-1KA Nano PCB Preheater Set, 120V
JBC Tools PHNE-1KA Nano PCB Preheater Set, 120V
The JBC Tools PHNE-1KA is a 120V Nano PCB preheater set for controlled bottom-side heating of small electronic assemblies, including smartphone-sized PCBAs. Its 108 × 70 mm heating area and two Type K thermocouple connections support temperature monitoring during rework. The heater, console and adjustable PCB support form a compact system for preparing boards before soldering or component removal.
Key Features
- 300 W maximum power for a compact 108 × 70 mm heating area.
- Power, Temperature and Profile modes for different process-control needs.
- Two thermocouple connections for regulation and protection monitoring.
- Adjustable Nano PCB support helps position boards consistently.
- Controlled preheating helps reduce thermal gradients during rework; results depend on the board and selected process.
- ESD-safe design for electronics workstations.
- USB connectivity for supported software and firmware functions.
Technical Specifications
| Property | Specification |
|---|---|
| Model | PHNE-1KA |
| Supply version | 120V |
| Maximum power | 300 W |
| Heating area | 108 × 70 mm / approximately 4.25 × 2.75 in |
| Selectable temperature | 50–250°C / approximately 122–482°F |
| Ambient operating temperature | 10–50°C / 50–122°F |
| Temperature measurement | Type K thermocouples |
| Thermocouple connections | 2 |
| Operating modes | Power, Temperature, Profile |
| Support clearance settings | 22, 45 or 65 mm, as listed for this set |
| Maximum work time | 600 minutes or indefinite, according to the listed configuration |
| Connectivity | USB-B for PC software, USB-A for supported firmware functions, console connection and pedal connection |
| Optional pedal | JBC P-005, not listed among included components |
| ESD design | ESD safe |
Included Components
- 1 heater unit.
- 1 console.
- 1 Nano PCB support, identified as PSN in this set’s listed composition.
- 2 PH218 Type K thermocouples.
- 1 PH217 Kapton tape.
Board and component examples are application illustrations, not additional kit contents. Confirm replacement-support compatibility by exact part number rather than assuming similarly named support revisions are interchangeable.
Best Uses / Applications
- Controlled preheating of small multilayer PCBAs during electronics repair.
- Smartphone-sized board rework where the heating area matches the assembly.
- Repeat bench work requiring consistent board positioning and monitored temperature.
- Supporting hot-air or soldering operations where a validated preheat process helps manage temperature gradients.
Operating Modes
| Mode | Purpose |
|---|---|
| Power | Works at a fixed power level, with a protection thermocouple option. |
| Temperature | Uses the regulation thermocouple to maintain the selected board temperature, with protection monitoring as configured. |
| Profile | Controls the heating progression using control and protection thermocouples. |
Choose temperature limits and profiles for the complete assembly. Preheating does not guarantee freedom from component damage. Profile availability can vary by controller or firmware revision; verify the supplied console before standardizing a process.
Selection Comparison
| Preheater class | Selection guidance |
|---|---|
| PHNE Nano | 108 × 70 mm heating area for small PCBAs and compact bench applications. |
| PHSE Small | Consider when the board requires a larger heating footprint than the Nano system. |
| PHXLE XL | Consider for substantially larger assemblies; verify board support, heating zones and facility requirements separately. |
Frequently Asked Questions
Is PHNE-1KA a complete preheater set?
The listed composition includes a heater, console, Nano PCB support, two PH218 thermocouples and PH217 tape. It is not a hot-air handpiece or soldering station.
What board size is it intended for?
The heating area is 108 × 70 mm. Check the board’s required heated region, support fit and component clearance rather than selecting by overall board dimensions alone.
What voltage is this version?
PHNE-1KA is the 120V version. Confirm that your electrical supply matches the equipment rating.
How many thermocouples can be connected?
Two Type K thermocouples can be connected. Two PH218 thermocouples are listed in the set composition.
How is Temperature mode different from Power mode?
Temperature mode regulates using a thermocouple measurement. Power mode uses a fixed power setting, with optional protection monitoring.
Does preheating eliminate thermal damage?
No. It helps manage board heating and thermal gradients, but safe results require a suitable profile, correct thermocouple placement and application-specific validation.
Is a foot pedal included?
The console supports a P-005 pedal connection, but the pedal is not listed among this set’s included components.
Related Products & Resources
Compare our PCB preheaters, browse JBC Tools, and explore the Soldering, Desoldering & Rework resource hub.
