ASM 115806, Pre-saturated Wipes, 70% IPA 30% DI, 100 Wipes/Tub, Case of 6
ASM 115806 Pre-Saturated Wipes, 70% IPA / 30% DI, 100 Wipes/Tub, Case of 6
Fast, effective pre-saturated cleaning wipes for SMT stencil surfaces, flux removal, and general PCB line cleaning. ASM 115806 wipes are pre-saturated with a precisely formulated 70% isopropyl alcohol / 30% deionized water solution that delivers low-residue, rapid-evaporation cleaning performance. Designed for use at the SMT line, these wipes eliminate the need for separate solvent dispensing — reducing waste, improving consistency, and keeping your production line moving.
Product Specifications
| Specification | Value |
|---|---|
| Part Number | 115806 |
| Manufacturer | ASM (formerly DEK) |
| Cleaning Solution | 70% Isopropyl Alcohol (IPA) / 30% Deionized Water (DI) |
| Wipes per Tub | 100 |
| Tubs per Case | 6 |
| Total Wipes per Case | 600 |
| Evaporation Rate | Rapid |
| Residue | Low residue |
| Container Type | Resealable tub |
Key Features & Benefits
- 70% IPA / 30% DI Formula — Optimized ratio for effective flux, light oil, polar soil, and white mineral residue removal
- Low Residue — Leaves minimal residue on stencil and PCB surfaces after cleaning
- Rapid Evaporation — Fast dry time keeps production lines moving without extended wait times
- Pre-Saturated Convenience — No solvent dispensing required; consistent saturation level in every wipe
- Resealable Tub — Keeps wipes moist and ready to use between cleaning cycles
- Bulk Case Packaging — 6 tubs per case for high-volume SMT production environments
Ideal Applications
- SMT stencil surface cleaning between print cycles
- Flux and solder paste residue removal from PCBs
- Light oil and polar soil removal from electronic assemblies
- White mineral residue cleaning on circuit boards
- General line cleaning and quick wipe-down during production
- Printer maintenance and squeegee cleaning
Frequently Asked Questions
What soils does ASM 115806 effectively remove?
These wipes are formulated to remove fluxes, light oils, polar soils, and white mineral residue. The 70% IPA / 30% DI solution is particularly effective on water-soluble and no-clean flux residues commonly found in SMT assembly.
Are these wipes compatible with SMT stencils?
Yes — ASM 115806 wipes are specifically designed for stencil surface cleaning in SMT printing operations. They are safe for use on stainless steel stencils and framed stencil systems.
How do these differ from dry wipes with separate IPA dispensing?
Pre-saturated wipes deliver a consistent, controlled amount of cleaning solution in every wipe, eliminating over- or under-saturation that can occur with manual dispensing. This improves cleaning consistency and reduces solvent waste.
What is the shelf life of these wipes?
Store in a cool, dry location with the tub sealed when not in use. Refer to the ASM Technical Data Sheet for specific shelf life and storage requirements.
Are refill packs available?
Yes — ASM offers compatible refill packs for use with the same tub format. Contact MTE Solutions for refill options and volume pricing.
Download Technical Data Sheet (PDF)
ASM — Global leader in SMT assembly equipment, consumables, and process materials for electronics manufacturing.
