Argon PC575-0500 High Temp ESD Kapton Tape 1-2" X 36 Yds 2 Mils Thickness
Argon PC575-0500 High Temp ESD Kapton Tape 1-2" X 36 Yds 2 Mils Thickness
Argon PC575-0500 is an anti-static polyimide film tape with a silicone adhesive, listed as a 1/2-inch-wide, 36-yard roll. The supplied overview describes heat resistance up to 500°F (260°C), clean removal after high-temperature cycles, and use in ESD-sensitive electronics work. Confirm the product’s detailed thermal and ESD ratings against Argon’s current technical data before specifying it for a process.
Best Uses
- Masking during circuit-board production, wave soldering, and solder-dip processes when an ESD-designated tape is required.
- Electrical insulation and wire bundling in low-static electronics workflows.
- High-temperature taping applications within the manufacturer’s confirmed temperature rating.
- Applications where a 1/2-inch width and 36-yard roll fit the masking or taping task.
Specifications
| Manufacturer | Argon |
|---|---|
| Model / SKU | PC575-0500 |
| Product type | ESD anti-static polyimide (Kapton-type) tape |
| Film and adhesive | Anti-static polyimide film with silicone adhesive |
| Width and roll length | 1/2 inch × 36 yards |
| Thickness | Product title lists 2 mil. The supplied overview also describes a typical 2.5 mil total construction with 1 mil film backing; confirm the exact construction with Argon before specifying. |
| Color | Transparent amber/brown |
| Maximum temperature | Up to 500°F (260°C), as reported in the supplied overview; confirm the manufacturer's rating for your process |
| Removal | Silicone adhesive is described as clean-removing after high-temperature cycles |
Frequently Asked Questions
What size is the Argon PC575-0500 roll?
It is listed as 1/2 inch wide by 36 yards long.
What thickness is this tape?
The product title lists 2 mil. The supplied overview also references a typical 2.5 mil total construction with a 1 mil film backing, so confirm the exact thickness with Argon’s technical data before ordering for a thickness-critical process.
What temperature can it withstand?
The supplied overview reports resistance up to 500°F (260°C). Check Argon’s current rating and your process profile before use.
Is this tape intended for ESD-sensitive work?
It is identified as ESD anti-static polyimide tape for sensitive electronics work. A numerical surface-resistance value is not provided here, so confirm the required ESD criteria with Argon.
What applications are listed for this tape?
The supplied overview names circuit-board production, wave soldering, solder-dip processes, electrical insulation, and wire bundling where low-static properties are required.
