IDEAL-TEK 2A.SA.DR.0.ITU ESD Rubber Grip Tweezers 2A.SA.DR, SS Anti-Mag, OAL 125mm-4.92in
IDEAL-TEK 2A.SA.DR.0.ITU ESD Rubber Grip Tweezers 2A.SA.DR, SS Anti-Mag, OAL 125mm-4.92in
The Ideal-tek 2A.SA.DR.0.ITU is a 125 mm ESD rubber-grip tweezer with straight, fine, rounded, flat tips for holding flat components. Its anti-acid, anti-magnetic stainless-steel body and ESD-safe thermoplastic rubber grips combine precision contact geometry with an ergonomic gripping surface. Ideal-tek identifies the base model as 2A.SA.DR.0.
Choose this style when the component benefits from a flat contact profile rather than a sharp point. Evaluate the actual component, available gripping area, workstation clearance, and applicable ESD-control requirements before selecting the tool.
Best Uses / Applications
- Holding and positioning flat components during precision assembly.
- Electronic-component handling where the DR rubber-grip configuration meets the approved ESD-control process.
- Inspection and positioning tasks where a rounded, flat tip profile suits the available gripping surface.
- Controlled-environment workflows after review of the facility's cleaning, material, and handling requirements. Manufacturer cleanroom-use wording is not a guarantee for every room classification or process.
Key Features
- Style 2A straight, fine, round, flat tips with a superior finish.
- SA anti-acid, anti-magnetic stainless-steel body with sandblasted finish.
- DR ESD-safe thermoplastic rubber grips, as identified in the manufacturer product data sheet.
- 125 mm overall length, with 1.90 mm tip width and 0.11 mm tip thickness.
- Non-reverse action. Confirm the exact part number rather than assuming all 2A tweezers share the same electrical properties.
Technical Specifications
| Specification | Value |
|---|---|
| Ordering SKU | 2A.SA.DR.0.ITU |
| Manufacturer base model | 2A.SA.DR.0 |
| Product category | ESD Rubber Tweezers |
| Tip style | 2A |
| Tip geometry | Straight, fine, round, flat |
| Reverse action | No |
| ESD-safe designation | Yes, for the DR model; assess suitability within the actual handling process |
| Body material | SA anti-acid, anti-magnetic stainless steel |
| Grip material | DR ESD-safe thermoplastic rubber |
| Body finish | Sandblasted |
| Tip finish | Superior finish |
| Overall length | 125.00 mm / 4.921 in |
| Overall width | 15.00 mm / 0.591 in |
| Overall height | 14.00 mm / 0.551 in |
| Tip length | 35.00 mm / 1.378 in |
| Tip width | 1.90 mm / 0.075 in |
| Tip thickness | 0.11 mm / 0.004 in |
| Tip opening gap | 8.0 mm / 0.315 in |
| Net tool weight | 22.0 g / 0.049 lb |
| RoHS | Listed as compliant in the product information; request current documentation where required |
Flat-Tip vs. Sharp-Tip Selection
| Consideration | 2A flat, rounded profile | Fine, sharp profile |
|---|---|---|
| Component contact | Evaluate for flat components with an appropriate gripping surface | Evaluate where a fine point is needed for access |
| Selection priority | Contact area, secure hold, and clearance | Access, visibility, and contact-force control |
| ESD suitability | Verify the complete model and use arrangement | Verify the complete model and use arrangement; tip shape alone does not establish ESD properties |
ESD and Process Considerations
Anti-magnetic construction and ESD control are separate properties. For this model, the manufacturer identifies the DR handle material as ESD-safe thermoplastic rubber. Verify how the tool, operator, gloves, and workstation work together under your approved ESD-control procedure. Do not treat an ESD designation as certification for electric-shock protection or live electrical work.
Follow the applicable manufacturer guidance for cleaning and material compatibility. Anti-acid stainless steel does not mean resistance to every chemical, and a rounded profile does not guarantee that a surface cannot be marked. Check tip alignment and grip condition as part of the local inspection procedure.
Technical Data Sheets
Ideal-tek 2A.SA.DR.0 product data sheet
DR grip-material data sheet
SA stainless-steel material data sheet
Frequently Asked Questions
What are the 2A.SA.DR.0.ITU tweezers designed to hold?
Ideal-tek describes the 2A style for delicate applications requiring a flat component to be held firmly. The straight, fine, round, flat tips should be evaluated against the actual component and available gripping surfaces.
Are these tweezers ESD safe?
The manufacturer identifies the DR grip as ESD-safe thermoplastic rubber and the product as an ESD rubber tweezer. Confirm the exact configuration and its suitability within the workstation's approved ESD-control process.
Are they anti-magnetic?
Yes. The body is SA anti-acid, anti-magnetic stainless steel. This material description is separate from the ESD properties of the DR configuration.
What are the length and tip dimensions?
The overall length is 125 mm. Tip width is 1.90 mm and tip thickness is 0.11 mm. The listed tip length is 35 mm.
Are these the same as any other style 2A tweezers?
No. Style identifies geometry, not the complete materials or grip configuration. Use the full ordering SKU 2A.SA.DR.0.ITU and manufacturer base model 2A.SA.DR.0 when checking documentation or replacements.
Can these be used in a cleanroom?
The manufacturer describes the model as suitable for cleanroom use. Your team still needs to assess the exact cleaning, contamination, material, and handling requirements; the product name alone does not qualify a specific process.
Related Selection Resources
Learn more in our precision tweezer selection guide. Browse Hand Tools filtered to Tweezers and Ideal-tek to compare other configurations.
