Hakko FX971-010 120V ESD-Safe Soldering Station
Hakko FX971-010 120V ESD-Safe Soldering Station
The Hakko FX-971 (part number FX971-010) is a 100W, 120V bench soldering station supplied with an FX-9701 handpiece and FH-215 iron holder. Its compact, stackable design and tilted LCD support electronics assembly and repair work where bench space and readable temperature information matter. The FX-9701 uses T39-series tips, sold separately.
At a busy repair or production bench, selecting a suitable T39 tip geometry lets the operator match contact area and component access to the joint. The station can operate independently; compatible Hakko Control Software adds connected process-management options.
Best Uses / Applications
- PCB assembly and through-hole soldering.
- Electronics repair and accessible surface-mount soldering with a suitable T39 tip.
- R&D and prototyping benches handling varied joint geometries.
- Production workstations requiring a compact footprint.
- ESD-sensitive electronics work within a properly grounded workstation.
Key Features
- 100W station power consumption and 120V supply configuration.
- 50–450°C selectable temperature range.
- 15-degree tilted LCD for viewing at the bench.
- Compact stackable station design.
- FX-9701 standard handpiece with T39-series tip compatibility.
- Compatibility with Hakko Control Software V3 or higher; software is not required for standalone operation.
Technical Specifications
| Brand | Hakko |
|---|---|
| Model / ordering part | FX-971 / FX971-010 |
| Supply voltage | 120V |
| Station power consumption | 100W |
| Temperature range | 50–450°C / 120–850°F |
| Temperature stability | ±3°C / ±5°F |
| Output voltage | 24V |
| Station dimensions, W × H × D | 93 × 126 × 133 mm / 3.7 × 5.0 × 4.8 in |
| Station weight | 1.2 kg / 2.6 lb |
| Handpiece | FX-9701 |
| Compatible tip family | T39 series; tips sold separately |
| Tip-to-ground resistance | Less than 2 Ω |
| Tip-to-ground potential | Less than 2 mV |
| Handpiece cord length | 1.2 m / 3.9 ft |
| Handpiece length, excluding cord | 188 mm / 7.4 in |
| Handpiece weight, excluding cord | 31 g / 1.1 oz, with T39-D24 tip |
What Is Included?
| Item | Reference |
|---|---|
| Soldering station | FX-971 |
| Soldering handpiece | FX-9701 |
| Iron holder | FH-215 |
| Power cord | B2419 |
| USB cable | B5129 |
| Instruction manual | Included |
Tips are not included. Select a compatible T39-series tip separately before placing the station into service.
FX971-010 vs. FX971-011: Buying Check
| Consideration | FX971-010 listing | Station-only alternative |
|---|---|---|
| Configuration | Station supplied with FX-9701 handpiece and FH-215 holder | FX971-011 is listed separately as station only; verify its exact contents |
| Tip selection | T39 tips sold separately | Confirm the intended handpiece and compatible tip family |
| Best buying approach | Starting or replacing a complete bench station setup | Check which compatible components you already own before selecting a station-only listing |
Soldering Tip Care Guide
Use the lowest effective temperature for the joint, keep the working tip clean and coated with fresh solder, and avoid excessive mechanical force. Follow Hakko's operating and maintenance instructions for the FX-9701 and T39 tips.
- Cracking: Do not strike the handpiece to remove solder or force the tip against a joint. Inspect for damaged plating and replace damaged tips.
- Corrosion: Avoid unnecessary high-temperature operation and prolonged idle heating. Re-tin after cleaning and before shutdown.
- Dewetting: If solder stops wetting the working surface, clean using an appropriate tip cleaner and apply fresh solder. Do not scrape, file or sand the plated working surface; replace a tip that cannot be restored using the manufacturer's procedure.
- Wear: Select the right geometry and contact area instead of compensating with pressure. Replace tips that become deformed, pitted or unable to transfer heat consistently.
Daily care summary: Inspect the tip, choose an appropriate temperature, clean gently, re-tin and follow the station's shutdown procedure when finished.
Frequently Asked Questions
Which tips fit the FX971-010?
The included FX-9701 handpiece uses T39-series soldering tips. Choose the geometry to match joint access and thermal contact requirements. Tips are sold separately.
Does the station include a handpiece and holder?
Yes. This FX971-010 listing includes the FX-9701 handpiece and FH-215 holder, along with a power cord, USB cable and instruction manual.
Is a soldering tip included?
No. Order a compatible T39-series tip separately.
What is the temperature range?
The listed range is 50–450°C / 120–850°F. Choose the working temperature for the alloy, joint and process rather than using the maximum by default.
Do I need Hakko Control Software to use it?
No. The station operates independently. For connected use, the listing specifies compatibility with Hakko Control Software V3 or higher; verify current system requirements before deployment.
Is it ESD safe?
The station is listed as ESD safe, with handpiece tip-to-ground resistance below 2 Ω and potential below 2 mV. Use proper grounding and the facility's ESD-control procedures.
Can multiple FX-971 stations be stacked?
The FX-971 has a stackable design. Follow the manufacturer's installation instructions and maintain safe access and clearances.
How does FX971-010 differ from FX971-011?
This FX971-010 listing includes the handpiece and holder. FX971-011 is listed separately as station only; verify the components required for your installation before ordering.
