Dymax T20010 Micro-Dot Hand-Held Manual Syringe Dispenser
Dymax T20010 Micro-Dot™ Hand-Held Manual Syringe Dispenser
The Dymax T20010 Micro-Dot™ is a hand-held, thumb-actuated manual syringe dispenser engineered for controlled, repeatable micro-dot dispensing of UV-cure adhesives, cyanoacrylates, epoxies, silicones, and other low-to-medium viscosity fluids. It requires no compressed air or power source, making it portable and ideal for flexible bench setups, field repair, R&D, and small-batch production. The adjustable plunger stroke delivers consistent dot sizes from 0.5 mm to 3 mm and accepts standard Luer-lock syringes in 3cc, 5cc, 10cc, and 30cc sizes. Sold individually.
Sold individually.
Specifications
| Model | T20010 |
| Type | Hand-held manual syringe dispenser |
| Actuation | Thumb-actuated plunger mechanism |
| Dot Size Range | 0.5 mm to 3 mm (adjustable) |
| Compatible Syringes | 3cc, 5cc, 10cc, 30cc standard Luer-lock |
| Viscosity Range | Low to medium (up to 50,000 cps) |
| Power Required | None — fully manual operation |
| Air Supply Required | No |
| Compatible Fluids | UV-cure adhesives, cyanoacrylates, epoxies, silicones, solvents, lubricants |
| Manufacturer | Dymax Corporation |
Frequently Asked Questions
Does the T20010 require compressed air or a power source?
No — the T20010 is a fully manual, thumb-actuated dispenser. No compressor, air lines, or power supply are needed. This makes it portable and practical for bench setups without dedicated air infrastructure, field repair environments, and R&D labs where flexibility matters more than throughput.
What syringe sizes and tip types are compatible?
The T20010 accepts all standard Luer-lock syringes in 3cc, 5cc, 10cc, and 30cc sizes. Dispensing tips and needles (18–30 gauge) are sold separately. Dymax free-flow taper tips (T18-125-TT-50 and T20-125-TT-50) are compatible and recommended for UV adhesive dispensing applications.
How do I control the dot size?
The adjustable plunger stroke lets operators dial in consistent dot sizes from 0.5 mm to 3 mm. Setting the stroke before a production run reduces variation and material waste. For very fine deposits below 0.5 mm, a pneumatic dispenser like the Dymax SD-200 with a high-gauge tip will provide more precise control.
Is the T20010 suitable for UV-cure adhesive dispensing?
Yes — the T20010 is widely used with Dymax UV-cure adhesives and other light-curable materials. When dispensing UV adhesives, pair it with UV-light block taper tips (such as the Dymax T18 or T20 series) to prevent premature curing of the fluid inside the tip during dispensing. The T20010 handles fluids up to 50,000 cps, covering most UV adhesive and epoxy formulations used in electronics assembly and medical device manufacturing.
