Teknipure TekniSwab Cleanroom Swabs: Foam, Polyester, Microfiber & ESD Types
Teknipure TekniSwab Cleanroom Swabs: Foam, Polyester, Microfiber & ESD Types
Teknipure TekniSwab cleanroom swabs are manufactured in cleanroom conditions using high-precision thermal bonding — no adhesives — to eliminate contamination risk. All swab head materials are laundered using a proprietary cleaning system to minimize non-volatile residues (NVRs), ions, and particles. Handles are 100% polypropylene with the Teknipure logo embossed on each one, and all swabs are packaged in silicone-free, lot- and bar-coded bags for full traceability. Six substrate types are available to match specific surface sensitivity, absorbency, and ESD requirements.
MTE Solutions stocks 50+ active Teknipure TekniSwab SKUs across six material categories, with case quantities of 1,000 or 2,500 swabs.
TekniSwab Types & Key Products
| Swab Type | Material | Best For | Example SKUs |
|---|---|---|---|
| Foam | 100 ppi polyurethane foam, thermally bonded | General cleanroom wiping, flux removal, solvent application | TKS522F Small (2.795"), TKS526F Rectangular Head (5.020"), TKS530F Channel Foam (5.949") |
| Polyester | Double-layer 100% polyester knit, thermally bonded | Sensitive surfaces, low-NVR applications, IPA wiping | TKS550P Small (2.716"), TKS553P Rectangular Head (5.020"), TKS554P Long Handle (6.417") |
| Microdenier over Foam | 100% microdenier polyester knit over 100 ppi polyurethane foam | Precision cleaning requiring both absorbency and soft surface contact | TKS570MDF Small (2.716"), TKS571MDF Rectangular Head (5.020"), TKS572MDF Long Handle (6.417") |
| Microfiber Nonwoven | Double-layer nonwoven microfiber, thermally bonded | Sensitive surfaces requiring enhanced particle capture and softness | TKS600MN Small (2.795"), TKS601MN Rectangular Head (5.020"), TKS602MN Long Handle (6.417") |
| Microfiber Woven | Double-layer woven microfiber, thermally bonded | Sensitive surfaces requiring particle capture with added durability | TKS581MW Small (2.795"), TKS583MW Rectangular Head (5.020"), TKS584MW Long Handle (6.417") |
| ESD Safe | Polyester, microfiber woven, or foam with ESD-safe handle | Environments sensitive to electrostatic discharge; ESD-controlled assembly areas | TKS502E Micro Tip Pick Dual End, TKS505E Pointed Foam ESD, TKS511E Microfiber Woven ESD Long Handle |
Frequently Asked Questions
What makes Teknipure TekniSwab swabs different from standard cleanroom swabs?
TekniSwab swabs are manufactured entirely in cleanroom conditions using thermal bonding — no adhesives are used — which eliminates adhesive contamination risk. All heads are laundered with a proprietary cleaning system to minimize NVRs, ions, and particles. Each swab is packaged in silicone-free, lot- and bar-coded bags for full traceability, making them suitable for ISO-classified cleanrooms and regulated manufacturing environments.
Which TekniSwab type should I use for PCB cleaning?
For general PCB flux removal and solvent application, foam swabs (TKS52xF series) offer good absorbency and are the most economical option. For sensitive component surfaces where particle capture is critical, microfiber nonwoven (TKS60xMN) or microdenier over foam (TKS57xMDF) swabs provide a softer contact surface with enhanced contamination control. For ESD-sensitive PCB work, choose any swab from the ESD series (TKS50xE or TKS51xE).
What handle sizes are available for TekniSwab swabs?
TekniSwab swabs are available in three general handle lengths: small/dual-end swabs (~2.6"–2.8", 2500/case), medium swabs (~3.2"–5.2", 1000/case), and long-handle swabs (6.417", 1000/case). The long-handle versions (TKS529F, TKS554P, TKS572MDF, TKS602MN, TKS584MW, TKS509E, TKS510E, TKS511E) are designed for reaching into tight spaces or deep cavities.
Are TekniSwab swabs compatible with IPA and other solvents?
Yes. The 100% polypropylene handle has excellent chemical compatibility with IPA, acetone, and most common cleanroom solvents. Head material compatibility varies by substrate — polyester and microfiber heads have broad solvent compatibility, while foam heads should be verified against aggressive solvents before use.
Browse all Teknipure TekniSwab cleanroom swabs at MTE Solutions.
