Ground Hardware

  • BENCH GROUND, DUAL, 10' CORD

    BENCH GROUND, DUAL, 10' CORD

    The Metal Grounding Block accommodates two wrist straps and comes complete with mounting hardware. Designed to be mounted under the bench and keep the wrist strap connections safe. The integral 15 ft. (4.5 m) cord ends with a ring terminal.

    $13.91
    Add to Cart
  • Clinch Snap, 10mm, Female

    Clinch Snap, 10mm, Female

    Pronged 10mm sockets . Easily installs onto multi-layer rubber or vinyl. Provides a strong contact for table matting

    $8.31
  • Clinch Snap, 10mm, Male

    Clinch Snap, 10mm, Male

    Pronged 10mm stud. Easily installs onto multi-layer rubber or vinyl. Provides a strong contact for table matting

    $0.83
  • SALE
    Common Pt. Ground (CPT), 15', 1 Meg, Male

    Common Pt. Ground (CPT), 15', 1 Meg, Male

    The CP1515 common point ground cords are highly durable and reliable ground cords. Equipped with two standard banana jacks, the CP1515 cords grounds up to two operators at the same time. The molded head has built in male snap for a sequre worksurface...

    Was: $6.95
    Now: $5.40
  • CORD, MAT MONITOR, 10MM STUD,  WITH DIODE, 6’

    CORD, MAT MONITOR, 10MM STUD, WITH DIODE, 6’

    " Connects workstation monitors to worksurface mats Tinned wire terminal connects to the workstation monitor 10mm stud terminal connects to the worksurface mat Embedded diode protects the workstation monitor should any voltage be induced onto the...

    $19.52
    Add to Cart
  • Field Service Mat Ground, 15', 1Meg, Male Center Snap

    Field Service Mat Ground, 15', 1Meg, Male Center Snap

    Transforming Technologies FM2000 Common Point Ground Cord System with the unique large center snap and two grounding connections allow for grounding of a wrist strap and work surface. The 10’ (extended length) coiled cord section snaps to technician’s...

    $12.47
  • Floor Mat Ground, 15', 1Meg, Female

    Floor Mat Ground, 15', 1Meg, Female

    The FM1515 is a low profile cord that grounds floor mats or work surfaces. A molded mushroom cap reduces concern of tripping hazards. The 15' long ground cord includes a 10mm female snap with a 1meg resistor Sold in multiples of 10.

    $7.13
  • GROMMET SNAP INSTALLATION HAND TOOL

    GROMMET SNAP INSTALLATION HAND TOOL

    Versatile tool used to install grommet style snaps Capable of setting numerous brands of fasteners simply by changing the dies Heat-treated cast aluminum construction Lightweight and durable allows for one-handed operation Made in the United...

    $224.03
    Add to Cart
  • GROUNDING SYSTEM, LAMINATE

    GROUNDING SYSTEM, LAMINATE

    Common point ground system for benches with laminate topsIncludes one 10 ft (3.0m) grounding wire with one megohm resistor and ring terminal, and one grounding bolt assembly with single wrist strap banana jack connection terminal. Made in the United...

    $17.70
    Add to Cart
  • SALE
    Low Profile Common Point Ground Cord

    Low Profile Common Point Ground Cord

    The CP2522 low profile ground cords are highly durable and reliable ground cords. Equipped with two standard banana jacks, the CP2522 cords grounds up to two operators at the same time. The low profile, molded head has built in male snapfor a sequre...

    Was: $6.95
    Now: $5.06
  • Low Profile CPT, 15', 1 Meg, Female

    Low Profile CPT, 15', 1 Meg, Female

    The CP2522 low profile ground cords are highly durable and reliable ground cords. Equipped with two standard banana jacks, the CP2522 cords grounds up to two operators at the same time. The low profile, molded head has built in female snap for a sequre...

    $5.47
  • Low Profile Floor Mat Ground Cord FM1515 - 15'L

    Low Profile Floor Mat Ground Cord FM1515 - 15'L

    The FM1515 is a low profile cord that grounds floor mats or work surfaces. A molded mushroom cap reduces concern of tripping hazards. The 15' long ground cord includes a 10mm male snap with a 1meg resistor

    $5.06
  • Low profile quad CPT, 4mm, 15', Male

    Low profile quad CPT, 4mm, 15', Male

    Transforming Technologies CP4822 is a table mat ground cord with four banana jack receptacles for secure ground connections. The CP4822 offers the common ground point required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20. The ground block mounts under front...

    $5.54
  • Metal Bench Mount Ground, 4mm, 15' ground

    Metal Bench Mount Ground, 4mm, 15' ground

    The CP4070 Metal Bench Mount Common Point Ground offers the common ground point required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20. The metal enclosed box mounts under front edge of workstation. Includes a 15? long ground cable with #10 ring terminal...

    $8.66
  • SALE
    Universal Snap Kit

    Universal Snap Kit

    Fast and easy way to install 10mm snaps or studs to soft work station materials. Includes 2 screws (floor and table mat lengths). 1 each: 10mm socket, 10mm stud, washer and screw base.

    Was: $14.62
    Now: $13.16
    Add to Cart
  • WRIST STRAP GROUNDING SYSTEM, 10FT CORD

    WRIST STRAP GROUNDING SYSTEM, 10FT CORD

    Two banana jacksProvides two grounding points for wrist straps or carts Ring terminal at end of ground cordAllows easy attachment to electrical ground Mounts underneath the front edge of the workbenchEliminates cluttered workspace Made in ChinaThis item...

    $27.37
    Add to Cart